SEI Hadley FA933800TX Assembly Instructions Manual

Text of SEI Hadley FA933800TX Assembly Instructions Manual

Hadley Media Fireplace -

Walnut/Espresso Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 [email protected] www.seidal.com

Hadley Media Fireplace

Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. A Quant

Middle Side Panel

3 Quantity of 1 Middle Shelf Panel 4 Quantity

Hadley Media Fireplace

Assembly Instructions Figure 1 Insert 8pcs wood dowels (B) into holes on middle side panels (2). Slip one end of middle side panels (2) into holes on bottom panel(1). Then, attach middle shelf panel (3) to middle side panels (2) as shown. Use 4pcs long bolts (E) through lock washers (F) and flat washers (G) to connect middle shelf panel (3) and middle side panels (2) to top panel (1). Tighten long bolts with Allen wrench (H). Figure

Hadley Media Fireplace

Assembly Instructions Figure 3 Insert 6pcs cam locks (C) into holes on assembled unit from figure 2 and left side panel (4). Screw 6pcs cam bolts (A) into holes on assembled unit from figure 1. Attach assembled unit from figure 2 and left side panel (4) to assembled unit from figure 1 by inserting wood dowels (B) and cam bolts (A) into corresponding holes until assembled unit from figure 2, left side panel (4), and assembled unit fro

Insert 2pcs cam locks (C) into holes on

cross bar (8). Screw 2pcs cam bolts (A) into holes on legs (9). Attach legs (9) to cross bar (8) by inserting 4pcs wood dowels (B) and 2pcs cam bolts (A) into corresponding holes until cross bar (8) and legs (9) meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 6 Attach unit from figure 5 to assembled unit by inserting 4pcs wood dowels (B) into corresponding holes until unit

Hadley Media Fireplace

Assembly Instructions Figure 7 Use screws (I) to connect back panel (11) to the back of the unit as shown. Tighten by rotating screws (I) clock wise with Phillips screwdriver. Figure 8 Use screws (L) to connect hinges (K) to door panel (13). Tighten by rotating screws (L) clockwise with Phillips screwdriver. 11 I I L L K K L L K L L 13

SEI Indoor Furnishing Owners Instructions: