SDI db checker Instructions

Text of SDI db checker Instructions

Sound Level Meter

 Ideal for maintenance of fire and security alarm systems  Easy to use  Unit conforms to the IEC651 type 2, ANSI S1.4 Type 2 (Required by NFPA 72 Chapter 14, 14.4.2.2.(15))  Designed to meet the requirements of Life Safety Engineers  Range from 32dB to 130 dB at frequencies between 31.5Hz and 8 KHz  Display with 01.dB steps on a 4-digit LCD  Two equivalent weighted sound pressure levels, A and C

Open battery cover and install a 9V battery in the battery

compartment. Turn power ON and select the desired response time and weighting. If the sound source consists of short bursts or only catching sound peak, set response to FAST. To measure average sound level, use the SLOW setting. Select desired Level. Hold the instrument comfortably in hand and point the microphone at the suspected noise source, the sound pressure level will be displaye

SDI Measuring Instruments Owners Instructions: