sauter TN-US Instruction Manual

Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Ultrasonic Material Thickness Gauge SAUTER TN-US Version 2.0 04/2020 GB TN_US-BA-e-2020 PROFESSIONAL MEASURING ...

Instruction Manual Ultrasonic Material Thickness Gauge Congratulations on the purchase of an ultrasonic material thickness gauge from SAUTER. We hope you will enjoy your quality measuring device with its wide range of functions. For questions, wishes or suggestions we are at your disposal. Table of contents: 1 ...

10. Measuring coated materials ........................................................................ 20 11. Material suitability........................................................................................ 21 12. Coupli ...

The model TN-US is a digital ultrasonic material thickness gauge. It is based on the same operating principles as SONAR. With the TN-US the material thickness of various materials can be measured with an accuracy of up to 0.1mm or 0.01 mm. It can be used for a variety of metallic and non-metallic, homogeneous materials. ...

A wide range of materials can be measured, including metals, plastics, ceramics, composites, epoxy, glass and other ultrasonic wave conductive materials. For special applications, certain models of sounders are available, especially for coarse-grained materials and high-temperature applications. • Zero setting and so ...

1 8 Ultrasonic probe ATU-US 02 1 9 Ultrasonic probe ATB-US ...

1 The main unit (display unit) 2 Keypad 3 LCD display 4 Pulse encoder socket 5 Radiation receiver socket 6 Zero plate 7 PC connection socket 8 Label (on the back) 9 Battery cover 10 Ultrasonic probe 2.1 Digital display 1. Pairing status: shows the pairing status; This symbol must appear while measurem ...

Switching on/off Calibration Sound velocity Background lighting On/ Off Enter key Button f. Reset Plus; US mode On/ Off Button to change the Units Minus; Beep mode On/ Off Save data or delete 3. Preparation for commissioning 3.1 Selection of the sound generator With this instrument a wide range of materi ...

or impurities in the material. Geometry of the transducer: The physical limits of the measurement environment sometimes determine the suitability of the transducer for a particular test object. Some sounders are simply too large to be used in a fixed enviro ...

2,5 14 3.0mm～300.0mm (Stahl） 40mm (grey cast iron HT200) 20mm For thick, highly damping or highly scattering materials ATU- US 09 5 10 1.2mm～230.0mm (steel) Φ20mm×3.0mm Normal measurement ATU- US 10 5 10 1.2mm～230.0mm (Stahl） Φ20mm×3.0mm Normal measurement, 90°angle ATU- US 02 7 6 0.75mm～80.0mm (Stahl） Φ15mm� ...