Samsung SmartThings Hub Manual
Text of the manual
How to Pair / Connect / Link a Samsung SmartThings Hub with an Aeotec MultiSensor 6 (via
iOS)
SmartHomeDB
www.smarthomedb.com
Page 1 of 6
Open the SmartThings App on your
mobile device.
Tap on the 'Right Top Menu Button'.
Step 1
Step 2
How to Pair / Connect / Link a Samsung SmartThings Hub with an Aeotec MultiSensor 6 (via
iOS)
SmartHomeDB
www.smarthomedb.com
Page 2 of 6
In the menu tap on 'Add Thing'.
Step 3
How to Pair / Connect / Link a Samsung SmartThings Hub with an Aeotec MultiSensor 6 (via
iOS)
SmartHomeDB
www.smarthomedb.com
Page 3 of 6
Step 4
Tap on 'Connect Now'.
The SmartThings Hub's LED will now blink green indicating that it is in pairing mode.
How to Pair / Connect / Link a Samsung SmartThings Hub with an Aeotec MultiSensor 6 (via
iOS)
SmartHomeDB
www.smarthomedb.com
Page 4 of 6
Power up the Aeotec MultiSensor 6 via
either a Micro USB cable or by inserting 2
CR123A batteries.
Proceed by pressing on the action button
on the Aeotec MultiSensor 6.
Step 5
Step 6
How to Pair / Connect / Link a Samsung SmartThings Hub with an Aeotec MultiSensor 6 (via
iOS)
SmartHomeDB
www.smarthomedb.com
Page 5 of 6
Step 7
The SmartThings App will indicate that it has found the Aeotec MultiSensor 6 and that the
pairing process has been successful.
Tap on 'Aeon MultiSensor 6'.
Tap on 'Next'.
Tap on 'Done'.
