Samsung QB98R Quick Setup Manual

QB98R * The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. * Download the user manual from the website for further details. http://www.samsung.com/displaysolutions BN68-09716D-00 1 Connects to MDC using a LAN cable. (10/100 Mbps) 2 Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. 3 DVI IN: Connects to a source device using a DVI cable or HDMI- DVI cable. MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo. 4 Connects to MDC using an RS232C adapter. 5 Connects to MDC using an RS232C adapter. 6 Receives sound from a source device via an audio cable. 7 Connects to a source device using a HDMI cable or HDMI-DVI cable. 8 Connects to a source device using a HDMI cable or HDMI-DVI cable. Connects to another product using a HDMI cable. 9 Connects to a PC using a DP cable. 0 0 Connects to another product using a HDMI cable. ! ! Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 0.5A. If the maximum value is exceeded, USB ports may not work. @ @ Outputs sound to an audio device via an audio cable. # # Connects to an external IR cable that receives signals from the remote control. Checking the Components Ports Issues Solutions The screen keeps switching on and off. Check that the cable between the product and the PC is connected correctly. No Signal is displayed on the screen. Check that the product is connected correctly with a cable. Check that the source device connected to the product is powered on. Depending on the type of external device, the screen may not display properly. In this case, connect it with the HDMI Hot Plug function turned On. Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications. The images on the screen look distorted. Check the cable connection to the product. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to ‘Preset Timing Modes’. There are shadows or ghost images left on the screen. Troubleshooting Guide Contact the vendor where you purchased the product if any components are missing. The pictures may look different from the actual components. Quick Setup Guide Warranty card (Not available in some locations) Power cord Batteries (AAA x 2) (Not available in some locations) Remote Control RS232C(IN) adapter HOLDER-CABLE Parts The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 1 Spacer logo Do not pull on the spacer logo using force. The logo may tear or break off. 2 Remote sensor Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product. * Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. 3 Power button Speaker 1 2 3 4 5 6 8 7 9 0 ! @ #

Power Supply AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Environmental considerations Operating Temperature: 0 °C – 40 °C (32 °F – 104 °F) Humidity: 10% – 80%, non-condensing Storage Temperature: -20 °C – 45 °C (-4 °F – 113 °F) Humidity: 5% – 95%, non-condensing * This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. * For detailed device specifications, visit the Samsung Electronics website. * The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung. - Accessory cables: signal cables and power cords Warning! Important Safety Instructions If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) / 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free) www.samsung.com/in/support Contact SAMSUNG WORLD WIDE Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product has included important literature concerning operation and maintenance. This product is RoHS compliant. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) / 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free) ꞏꞏIf your equipment uses an AC adapter: ‐‐Only use the AC adapter with your product by Samsung. ‐‐Do not use the power cord with other products. ꞏꞏDo not install this equipment in a confined space such as a case or similar. ꞏꞏThe slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. The slots and openings must never be blocked or covered. ꞏꞏThe product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. ꞏꞏDo not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. (Apparatus shall not be exposed to dripping or splashing) ꞏꞏThe apparatus must be connected to an earthed MAINS socket- outlet (Class l Equipment only). Or Use only a properly grounded plug and receptacle (Class l Equipment only). ꞏꞏTo disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. ꞏꞏAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER. Connecting to a PC DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting to MDC For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website. http://www.samsung.com/displaysolutions RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT Connecting to a Video Device DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/HDMI AUDIO IN DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/HDMI AUDIO IN Connecting the LAN Cable Use Cat7(*STP Type) cable for the connection. (10/100 Mbps) *Shielded Twist Pair DVI/MAGICINFO IN DVI/HDMI/AUDIO IN AUDIO OUT RJ45 Connecting to an Audio System DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting and Using a Source Device Specifications