Samson MTR231 Owner's Manual
Text of the manual
MTR231 Multi-Pattern Studio Condenser Microphone
3
Introduction
Thank you for purchasing the Samson MTR231 multi-pattern studio condenser
microphone. Samson has a long history of developing high-quality microphones for
live and recording applications. The MTR series is our latest and most advanced
line of micropho
MPF1 Pop filter
•
Carry case
Features
•
Large diaphragm multi-pattern studio condenser
•
Dual 1” gold-sputtered capsule
•
Smooth and transparent sound reproduction
•
Selectable pick-up pattern: Omnidirectional, Cardioid,
Figure-8
•
48 volt phantom power operation
•
10dB attenuation pad
•
Internal capsul
MTR231 Multi-Pattern Studio Condenser Microphone
5
Powering
Setting the Microphone Level
The MTR231 is a condenser microphone and therefore requires 48V phantom
power. Phantom power is provided by a mixer’s preamplifier channel or if neces-
sary, an external phantom power supply and sent to the microphone along
An important characteristic of any microphone is its directionality or polar pattern.
The MTR231 features a dual-membrane capsule allowing for a choice of three
individual polar patterns: omnidirectional, unidirectional (cardioid), and bidirec-
tional (figure-8). The microphone pattern can be selected using the three-position
slide switch below the right s
MTR231 Multi-Pattern Studio Condenser Microphone
7
10dB Attenuation Pad
The MTR231 includes a 10dB attenuation pad that can be selected with the slide
switch located below the grill, which is used to prevent overloading the onboard
preamplifier by lowering the input sensitivity of the microphone preamplifier
circu
In order to maximize the quality of the sound you are capturing, you must pay
careful attention to the placement of your MTR231 and how it is positioned for
the instrument or vocalist. When the MTR231 is set to the cardioid polar pattern,
it exhibits a phenomenon known as “proximity effect” which is a resulting change
in the frequency response of a mic
MTR231 Multi-Pattern Studio Condenser Microphone
9
Microphone Placement
finger picking is usually naturally warmer. To record an even, full tone, it is sug-
gested that you begin by positioning the microphone 3–6 inches above the center
of the bridge. This will help emphasize the higher frequencies and pick up t
Stereo Microphone Techniques
The term “stereo” will be used here to describe different microphone techniques
using multiple channels of audio to create a reproduction of the sound stage over
a pair of loudspeakers. There are many approaches that can be used with two or
more microphones, but we will focus on three methods: spaced microphones, X/Y
coinc
MTR231 Multi-Pattern Studio Condenser Microphone
11
To isolate the MTR231 from external vibrations and prevent unwanted noises that
are transmitted through the stand, the microphone can be fitted on the custom-
designed MSM1 spider shockmount. Follow the steps below to install the micro-
phone into the shockmount.