iOptron StarFi Manual 

iOptron StarFi provides the Wi-Fi connection capability to the following iOptron telescope mounts:  iOptron CEM60/CEM60-EC  iOptron iEQ45/30 Pro  iOptron iEQ45/30 w/8407 HC  iOptron iEQ45 w/8406 HC  iOptron CEM25/CEM25EC  iOptron ZEQ25  iOptron Cube II/CubePro w/8408 HC  iOptron SmartEQ Pro+  iOptron SmartEQ/SmartEQ Pro 1. Hardware connection: Step 1. Power the StarFi Adapter If the mount has an iOptron Port ...

Open the Wi-Fi connection panel on your device, Find a Wi-Fi SSID called “StarFi”, then connect. 3. Connect the Mount (1) Windows After connect the computer to the StarFi WIFI network, launch iOptron Commander to connect the mount to your computer via StarFi. Then you can use your favorite ASCOM compatible software to control the mount. (2) Tablet/SmartPhone with SkySafari The App needs be configured first. Step 1. C ...

(German) or Alt-Az. GoTo (only for iEQ45 Pro AA mode), Scope Type should be  iOptron iEQ45 & 8406 for iEQ45 w/8406  iOptron SmartEQ/iEQ/ZEQ & 8407/8 for iEQ30/45 w/8407, ZEQ25, and SmartEQ/SmartEQ Pro  iOptron CEM/iEQPro /AZ mount Pro for CEM60/CEM60EC, CEM25/CEM25EC, iEQ30 Pro/iEQ45 Pro, Cube II, Cube Pro w/8408, and SmartEQ Pro +. Step 4. Turn off Auto-Detect SkyFi. Change the IP Address to 10.10.100 ...

Snow Leopard or later): Check SkySafari from Simulation Curriculum Corp. (3) Apple iOS Platform Check SkySafari from Simulation Curriculum Corp. (4) Google Android platform (app version and android version unknown): Check SkySafari from Simulation Curriculum Corp. 4. StarFi configuration: The StarFi Wi-Fi adapter is shipped with no password protection. You can change the StarFi SSID and enable password protection so o ...