Lanner R3S Operation & User’s Manual

2 Icon Descriptions The icons are used in the manual to serve as an indication of interest topics or important messages. Below is a description of these icons: Note: This mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. Warning: This mark indicates that there is ...

3 Acknowledgement Intel®, Intel® Atom® are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. FCC Class A Certification Thi ...

4 Keep the chassis area clear and dust-free during and after installation. Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves. Wear safety glasses if you are working under any conditions that might be hazardous to your eyes. Do not perform any action that creates a ...

5 Avertissement concernant la pile au lithium Risque d’explosion si la pile est remplacée par une autre d’un mauvais type. Jetez les piles usagées conformément aux instructions. L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité connaissant toutes les spécifications d’in ...

6 in. If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. Installation of th ...

7 Grounding Procedure for Power Source Loosen the screw of the earthing point. Connect the grounding cable to the ground. The protection device for the power source must provide 30 A current. This protection device must be connected to the power source before power. The cable hould 16 AWG Procédure de mise à la terre pour source d� ...

8 Table of Contents Package Content....................................................................................................... 10 Ordering Information ............................................................................................... 10 System Specifications ............................................................ ...

9 Using the Ignition System Manager (ISM) ............................................................... 56 Warranty Policy ........................................................................................................ 58 RMA Service ................................................................................................... ...

10 Built for rolling stock setting, the R3S series is certified with EN50155, EN50121-3-2, EN50121-4, EN50125-3 and EN45545 standard as an IP50 rated fanless rolling stock computer. R3S not only features high-performance Intel Atom x7-E3950 CPU, but also boasts an abundance of I/O and internal expansion capabilities, including 6 x M12 X- code ...