LEGRAND C2G 29975 Interface Manual
Text of the manual
© 2019 Legrand All Rights Reserved rev.11/19 WIG_29975TX_29976RX_Over IP
6500 Poe Avenue
Dayton, OH 45414
Phone 800.293.4970
www.c2g.com
Settings Tab
Click on the “Settings” tab to (a)
change the login password, by entering
the old password, new password, and
reconfirming the new password, and
clicking on “Apply”, (b) upgrade the
device firmware, b
Group of Pictures (from 5 to 300), (f) set the encoding method (VBR – variable, or CBR -
continuous bitrate), (g) set the URL addresses for the supported communication protocols,
including TS, HLS, FLV (along with HTTP Port# setting), RTSP (along with Port# setting
and Push or Pull mode selection via pulldown tab), RTMP (along with Port# setting and
Push o