Lee & Plumpton DOMINOBEAM Instructions

Text of Lee & Plumpton DOMINOBEAM Instructions

• Apply manual handling guidelines when

building this item. • Only use component fixings supplied with this item. • Build product on a flat surface. Recommendations Levelling the Beam desk It is important to level the feet at the start and finalise at the end to ensure the product is level. This can be done by hand. 1. Ensure part A, a Zinc Insert, is present in each end of the Beam Crossrail, this must be inserted

Step 5: Plastic Beam Spacer

A L E E & P L U M P TO N DOMINOBEAM Rectangular / Wave Desk Instructions No. 096 A/0960 WARNING If assembling more than one desk steps 5, 6 and 7 should be completed in an upright position. 5. Using part D attach the plastic Beam spacer, part E loosely. 6. Place the desk top face down onto the floor. Flip the assembled Beam frame over and place on to the desk top. Secure the desk top to the frame using part F. Line up the s

Lee & Plumpton Indoor Furnishing Owners Instructions: