Lacewing EasyPress Instruction Manual

Congratulations on your purchase from Lacewing! Now, let’s set it up ready to press your favourite fruit! Parts List： A (Stand and juice collecting bowl) B (Press Handle) C (Pressure Plate) Dx2 (Hoop) E (Pressing Cage) Fx2 (Wooden Plate) G (Wooden Plate) Hx2 (Wooden Cross Bar) ...

Screw) L (Centre Rod) M (Centre Rod) Assembly： 1. Part D and Part E, before being assembled, all metal hoops with bevel edge should be set in one direction whilst the smooth edge must be in-line on the opposite side. Part E should be attached to the inner side of the metal hoops. When assembly is finished, all pressing cage blocks should be placed upon a flat surface to make sure all blocks are kept in line aŶd with the saŵe height, to ŵake sure it’s sŵooth aŶd steady when placed in the round base. 2. Part C and Part G assembly ...

4. P the assembled pressing cage with bevel edge upwards on the assembled pressing stand (Part A) and cover with a juice bag (Part J). 5. Put the chopped fruit into the barrel, then place Part F & Part H in sequence, after that, place assembled Part C & Part G (Step 2) over the centre rod. 6. The pressure ring (Part I) should be placed over the pressure plate first, then screw on the press handle (Part B). Fruit can be pressed when rotating Part B in clockwise direction. ...