LTT iLaser 3000 Series Quick Start Manual

www.lttcorp.com SOP # S420040 page 1/3 iLaser Main Control Board Instruction and Exchange
Instruction... 1. Please open the front door of chassis; you will see the main control board. 2. Parts description... 1 2 3 9 4 5 11 10 6 8 7 ...

www.lttcorp.com SOP # S420040 page 2/3 No. Name Function Description 1 LPT port To receive working files from PC. It will be connected to a 25pin to USB cable. 2 Panel port It is connected to panel. 3 Motion port It is connected to motion driver board. 4 Axis sensor ports They are connected to photo sensor. There are five se ...

www.lttcorp.com SOP # S420040 page 3/3 7. Connect with all the cables. 8. Please pay attention, there are free RJ45 connector, PS/2 connectors and a monitor connector, use a strip to tight them at the other cables, they must not be contacted with any metal. If there are any short contacts, it will destroy the main control bo ...