Mercusys MP500 Operation & User’s Manual

Specifications are subject to change without notice. is a registered trademark of MERCUSYS TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translat ...

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. EU Declaration of Conformity MERCUSYS hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/3 ...

вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information Ǵ Keep the device aw ...

Symbol Explanation AC voltage DC voltage Indoor use only Functional earth wiring terminals only Warning electric shock Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant t ...

...

instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them in typical scenarios. When using this guide, please notice that features of the powerline adapter may vary slightly depend ...

help of your home’s electrical circuit. 1.2 Product Appearance Your powerline adapter may differ in appearance slightly from that depicted because of the region and product version. Note: MP500 KIT (E ...

Power Plug The powerline adapter has a Plug that can be connected to a power socket. Pair Button Press and hold the button for 1 second to join a powerline network. Go to Secure Powerline Network by Pairing for more information. Press and hold for more than 6 seconds to reset the powerline adapter. Ethe ...

Chapter 2 Use the Powerline Adapter 2.1 Requirements Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles: Ǵ All powerline adapters should be on the same electrical wiring system. Ǵ ...