MeiTrack Mobileye T622 Manual 

Copyright © 2017 Meitrack Group All rights reserved. - 2 - Change History File Name MEITRACK T622 GPRS Protocol Created By Kyle Lv Project T622/T622G Creation Date Update Date 2015-12-28 2017-07-10 Subproject GPRS Protocol Total Pages 48 Version V1.2 Confidential Internal Documentati ...

Copyright © 2017 Meitrack Group All rights reserved. - 3 - Contents 1 T622 Command Format ............................................................................................................................................. - 5 - 1.1 GPRS Command Format ...................... ...

Copyright © 2017 Meitrack Group All rights reserved. - 4 - 3.35 Registering a Temperature Sensor Number – C40 .................................................................................... - 30 - 3.36 Deleting a Registered Temperature Sensor – C41 .......................... ...

Copyright © 2017 Meitrack Group All rights reserved. - 5 - 1 T622 Command Format 1.1 GPRS Command Format The GPRS command format is as follows: GPRS command sent from the server to the tracker @@,,,<*Chec ...

Copyright © 2017 Meitrack Group All rights reserved. - 6 - Descriptions about AAA format commands are as follows: Parameter Description Example Event code Decimal For details, see section 1.5 "Event Code." 1 Event code 1: SOS Pressed Latitude (-)yy.dddddd Unit: degree Decimal When a ...

Copyright © 2017 Meitrack Group All rights reserved. - 7 - HDOP Decimal The value ranges from 0.5 to 99.9. The smaller the value is, the more the accuracy is. 0.5–1.0: Perfect 2–3: Wonderful 4–6: Good 7–8: Medium 9–20: Below average 21–99.9: Poor 5.0 The HDOP is 5.0. Alti ...

Copyright © 2017 Meitrack Group All rights reserved. - 8 - T622: AD1/100 Voltage formula of battery analog (AD4): T622: AD4/100 Voltage formula of external power supply (AD5): T622: AD5/100 AD6–AD8: Reserved. (Note: Unnecessary AD values at the end of this parameter can be removed ...

Copyright © 2017 Meitrack Group All rights reserved. - 9 - Bits 1–7: reserved. Bit 8: Whether to connect the FMS. When the value is 1, the FMS is connected. Bit 9: Whether to enable the FMS function. When the value is 1, the function is enabled. Bits 10–31: reserved. Customized d ...

Copyright © 2017 Meitrack Group All rights reserved. - 10 -  Value N: 936 (hexadecimal: 03A8)  Frequency: 1018 (hexadecimal: 03FA) Data will be transmitted in CCC 0x0501 format when the tracker connects to a peripheral compatiable with FMS protocol, which is as follows: $$