MFTech USB-Interface Quick Start Manual

Text of the manual

1. Transmitter settings

Connect your R/C transmitter (in PPM mode, without RF part / unplugged crystal) with the Interface only if it is switched off! The R/C Interface is connected with the buddy box. Thus, the transmitter acts like a slave transmitter. You should set up your transmitter for slave mode and make any settings necessar

5. Install IntCon

Installation 1. Download IntCon from . 2. Extract / install the content of the archive to C:\Program Files\IntCon\. 1. Connect the USB- Interface with your PC. 2. Double-click on intcon.exe to open IntCon. 3. Mark the USB-Interface in the table (Name RC USB, Vendor MFTech). 4. Click “Open”. 5. Configure the USB-

Other USB Interfaces Manuals