Sigma SFG Instruction Manual

Tel +39 030 2650479-88 – Fax +39 030 2650143 www.sigmasrl.info INSTRUCTION MANUAL SHEETER MODEL SFG INSTRUCTION MANUAL: this instruction, user’s and servicing manual gives the directions necessary for transport, setting at work, use and servicing of this machine and must be read befor ...

2.0) DESCRIPTION OF THE MACHINE PAGE … 4 3.0) IDENTIFICATION PAGE … 4 4.0) OPERATIVE CONDITIONS PAGE … 5 5.0) DIMENSIONS AND WEIGHTS PAGE … 5 6.0) TRANSPORT PACKAGING - MOVEMENTS PAGE … 5 6.1) PACKAGING DIMENSIONS PAGE … 5 6.2) LIFTING REGULATION BY LIFT CARRIAGE PAGE … 5 6.3) PLANE MOVEMENTS PAGE … ...

out a particular operation. Symbol Description Features OPERATOR A healthy person who has been taught how the machine operates and who has read and understood this user’s and servicing manual. ELECTRICIAN SERVICER A healthy person qualified as an electrician and who has ...

2.1) GENERALITIES: The SFG puff pastry processors are rolling machines to be used in catering, bakery and gastronomy laboratories to prepare foodstuffs. They must fine down food pasta layers with butter, margarine or eggs (special version) in order to obtain pastry in the thickness desired. The gradual mixture thinning is ex ...

installed in a lighted, airy building, on a compact and flatten support. Temperature ranging from 5 to 40°C; humidity not over 50% at 20°, or not over 90% at 40°C. Lighting: lights available for the operator must comply with the type of work being carried out, according to the ge ...

with two wheels; after unpacking it and removing the pallet fastenings, it can be carefully set on the floor and moved to a plane and smooth surface. The belts are in the box, but not assembled; their transport can be done by hand. 6.4) LIFTING BY MEANS OF BELTS The machine can be lifted by means of a couple o ...

The belts must be assembled and the protection grid and the rollers lowered otherwise the safety systems prevent the machine from working. DO NOT REMOVE OR RIG THE ELECTRIC AND MECHANICAL PROTECTIONS AND SAFETIES OF THE MACHINE. 8.1) INSTRUCTIONS TO ASSEMBLE THE SCRAPERS: The scrapers are already housed on delivery. All scrapers ...

1) Master circuit breaker with mains signal lamp. 2) Control lever and motion reverse. 3) Control pedal and motion reverse (upon request). 4) Adjusting lever for fining down. 5) Trigger for lever 4 6) Ratchet of lever 4 8.5) SAFETY WARNINGS: Space around the machine must be properly lighted, clear and clean. Stuff must wea ...

when the current is on. Just press button 1 to start the machine , the closure of the circuit is signalled by the lighted lamps. Lower lever 2 as shown in the figure to test correct connection, the belt must move to the direction of the arrow. Conversely, reverse the coup ...

and belts. Disassemble the scrapers and clean them with the greatest care: the machine works better if these parts are in good conditions. 9.3) SAFETY DEVICES: The machine is fitted with a set of safety devices that safeguard the operator. These must not be rigged or cut out. Check ...