Ocean Digital DK-23 Operation & User’s Manual

User Manual ...

Precautions .......................................................3 Getting started ...................................................4 Changing radio mode ..........................................5 DAB station scan ................................................5 Tuning DAB station .............................................5 FM scan .......................................... ...

[ ] Long press to power on and off. [MODE] When the radio is power on, short pressing the button to switch between DAB and FM radio 2. Preset button 1-3 Press and hold the button 1-3 to quick saving the favourite channel, hit the same button to recall the channel 3. VOLUME Rotate the knob to increase or reduce the volume level. 4. Display 5. Speaker 6. PRESET Long press the button to enter the preset list Short press the button to recall ...

high humidity environment over prolonged periods of time as this may damage the unit. • Keep the radio away from liquids as it may get damaged. Please switch off the radio immediately if water or liquids is spilled into the radio. Consult with the shop you bought this radio for any question. • Avoid using or storing the unit in dusty or sandy environment. • Do not open and repair the radio by ...

cable is supplied in the product package. Hold and press the [ /Mode] button to power on. To power off the radio, long pressing the same button. Charging battery You can check the level of battery power remains on the radio. When the radio is playing, press the [Info/Menu] button repeatedly until you see the battery indicator showing as e.g. BAT:50%. When battery power is low ...

When the radio is power up, press the [ /Mode] button to select between DAB and FM mode. DAB station scan If this is the first time the radio is power up, it will scan the DAB radio stations automatically. It will display and play the first station after the scan is done. In case it displays “No DAB Service”, short press the [Scan] button to start scanning. Tuning DAB station Press the [UP] or [DOWN] button to choose other radi ...

initiate the auto scan. The radio will store the preset automatically when the scan is done. To manual scan, use the [UP] or [DOWN] button button and it will fine tune the frequency in a step of 0.05MHz. Preset a station FM scan/Preset a station - 06 - Your radio can store up to 20 DAB stations and 20 FM stations in its preset memories for instant access to your favorite stations. 1. Tune your ra ...

will pop up. Press the [UP] or [DOWN] button to find the station you want to listen, then press [OK] button to recall the station. If you have preset the favourite channels for Preset button 1-3, simply press these buttons to access them quickly. Note 1. If there is already an existing DAB or FM station stored under a preset, it will be overwritten when you save a new station. 2. The DAB pres ...

button repeatedly to cycle through the information broadcasted by the radio as follow: Under DAB • DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station such as the news, songs being played…etc. • PTY (Programme Type): shows which type of programme you are listening to, “Music”, “Talk”, “News” etc. If there is no information, it will display “Programme ...

1. Set Time/Date: This allows the user to manually set the current Time and Date. 2. Auto Update: This function will set the radio’s time and date automatically with data sent along with the broadcast of either the FM or DAB radio station. You can choose “No Update” then the radio will not receive the time data. 3. Set 12/24 hour: This option will change the format of your clock to either 12 hour or 24 hour format. 4 ...

French, German, Italian. Software Version Press to see the firmware version. Factory reset To reset the radio to default, press and hold the [Info/Menu] button to enter , select and press OK, choose Yes to confirm for a reset. The radio will reboot and scan the DAB station accordingly. System - 10 - ...