REPLIGEN TangenX PRO PD Compatibility Manual

Text of REPLIGEN TangenX PRO PD Compatibility Manual

TANGENX™ PRO PD CASSETTE INSTALLATION

1. Lift the end plate off the manifold of the TangenX™ PRO PD cassette holder. 2. Remove the protective blue sheet and rinse the EPDM gaskets with deionized water or WFI. Place a rinsed gasket flat against the bottom manifold; ensure that the holes in the gasket line up with the holes in the manifol

Tangential flow filtration cassettes are typically installed in a stainless steel

cassette holder consisting of two steel plates, one acting as a flow distribution manifold and the other as a mating solid flat surface. Repligen offers a complete series of high performance stainless steel cassette holders and are designed for op

REPLIGEN Laboratory Equipment Owners Instructions: