Reonix Automation R2+ Quick Start Manual
Text of Reonix Automation R2+ Quick Start Manual
R2+ Alarm Dialer
QUICKSTART
GUIDE
Tools Required:
Philips screwdriver (small)
PPE (Recommended):
Safety gloves while removing
and replacing the top plate
www.reonix.com
Form: RAI-SD-013
Issue Date: May 12, 2019
Revision Date: Apr 26, 2020
Revision Number: 4
Configure Ethernet Settings
Configure Email Settings
04
06
Confirm Connectivity
07
Configure Cellular Settings
05
The LAN settings are for the physical Ethernet port.
If you are not using this function
DIN rail where the module is installed has to be bonded to ground.
Do not use 192.168.1.15 as your IP address.
1
2
Install SIM Card
01
Connect to the Unit
Connect Power and Peripherals
Steps to assign static IP:
02
03
If the unit will rely entirely or partially on the cellular
network for its connectivity, the SIM card should be
installed first. Please refer to Initial Physical Setup
on the SCADADroid® Setup Manual for detailed
instructions on