Nustep TRANSITT Manual 

Introduction................................................................................................................................................................................................. 4 Safety Instructions.................................................................................................................................................................................... 5 Installation and Placement.....................................................................................................................................................................7 AC Adapter Use....................... ...

TRANSITT’s innovative technology combines advanced software and responsive hardware with strategically placed sensors to create a versatile isometric and dynamic training system that provides unique performance measurement, training strategies and solutions for outcome-driven wellness and physical training. NuStep designed and developed TRANSITT based on scientific research and with years of feedback from health care providers and fitness experts working with clients in a variety of settings. TRANSITT offers an innovative approach to training that engages the exerciser and supports ...

CAUTION WARNING This is the safety alert symbol. It is used to call attention to instructions concerning personal safety. Read and obey all safety messages that follow this symbol to avoid possible injury or death resulting from misuse. CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. WARNING indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. WARNING Do not modify this equipment without authorization of the manufacturer. Use this equipment o ...

CAUTION See your physician before beginning any exercise program. Supervision is required for users with a disability or medical condition. Stop exercising if you feel faint or dizzy while using this product, and seek medical help or advice. Use this product only as directed by your physician if you have any type of heart disease, hypertension, diabetes, respiratory disease, or any other medical problem, or if you are pregnant. Read this manual before using this product and save it for future reference. Always wear shoes and proper clothing when exercising. Do not operate this product if it appears damaged or inoperable ...

Carefully unpack the Transitt from the shipping container and transport the product to the installation location. The Transitt is designed for indoor use only. Place equipment mat under the Transitt to protect floor, reduce vibration and ensure normal operation. To ensure safe and effective operation of your Transitt, place on a flat, stable surface. Adjust leveler feet as required. The minimum amount of required free space around the equipment is 24 inches (61 cm) for the sides, and 12 inches (30 cm) for the front and rear. Additional free space is necessary to accommodate wheelchair access. The Transitt is very heavy; i ...

The Transitt is powered by an AC adapter. Use the adapter provided with the equipment. The AC adapter may be plugged into the front or rear jacks of the Transitt. Plug the adapter into an appropriate power outlet. Ensure power cable is routed in a manner that prevents tripping hazards and prevents damage to the adapter. Avoid placing any pressure or strain on adapter cables, jacks, or plugs. When not in use, store the AC adapter in the Transitt accessory bag. For adapter specifications, please refer to the technical data section of this manual. Front Jack Rear Jack ...

Foot Pedals Seat Release Lever Seat Recline Lever Leveler Feet Seat Swivel Release Lever Armrest Accessory Bag ...

1. Use the arm handle grips to push or pull the arms and pedals to the desired position. 2. Push down on the green StrideLock lever located under the grab ring and release. The lever will be in an UP position when locked. 3. Verify that StrideLock is engaged by pushing or pulling on the arm handles - they should not move. To disengage StrideLock: 1. Push down on the StrideLock lever again. The lever will be in the DOWN position when unlocked. The StrideLock feature allows users to lock the Transitt’s arm handles and foot pedals. Locking the arms and pedals stabilizes the product and makes it easier for users to ...

1. Place feet on pedals. 2. Lift the front green lever to unlock seat. 3. Using feet, slide seat forward or backward to adjust distance. 4. Check that knee has a slight bend when leg is nearly fully extended. 5. Release the lever to lock seat in position. Adjust Seat Back Angle (optional) 1. Place both feet on pedals 2. Lift the black lever on the green rail - left side of the seat. 3. To increase recline, push on seat back - up to 12° recline possible. 4. Release seat recline lever to lock in position. Lift front lever to adjust seat distance. Knee has slight bend when leg is nearly fully extended. Push ...

1. Pull the green release lever up on the arm handle to unlock. 2. Slide handle in or out to adjust length. 3. Check that elbow is slightly bent when arm is fully extended (for many people this may be the same number as their seat position). 4. Press down on the green release lever to lock the handle in place. Swivel Seat Operation 1. Lift the rear green release lever to unlock seat. 2. Swivel the seat in either direction (seat swivels 360˚and locks every 45˚). 3. Release the lever to lock seat in position. NOTE: The seat can be rotated with or without a user seated on the machine. Pull up on lever to unlock. Push down o ...

position and physical set up on the machine will vary, depending on the program and the exerciser's needs. Use the information that follows as a general guide or starting point for set up and positioning. NOTE: On-screen instructions specific to each program can be accessed by tapping on the TRANSITT icon in the upper right corner of the screen. Dynamic Exercise Dynamic stepping exercises on the TRANSITT use the same physical set up. After adjusting arm handles and seat distance, there should be a slight bend in the exerciser's knees and elbows ...

or off. 2. Once TRANSITT powers up, the initialization screen opens. Press Tap to Initialize to begin the initialization process. NOTE: Make sure no one is sitting on or touching the TRANSITT during this process. 3. After the initialization process completes, the exerciser can sit on the TRANSITT. 4. Once seated, the exerciser will be instructed to complete three full cycles of the pedals or handles to initialize the position sensors. NOTE: The TRANSITT can remain on during the day (with exercisers logging out after their session), but should be shut down ...

2. Press the power button on the back of the console to turn off. Creating User Accounts New exercisers can create a user account and log in. With user accounts, exercisers can save their settings and store last used settings. Part 1. Create an Account 1. Touch the screen, the log-in screen opens. 2. Tap on the New User tab to open the User Enroll screen. 3. Tap on the screen to open the keypad. NOTE: To move from field-to-field, either tap in each field or tap the Next key on the keyboard. Log Out New User ...

password are case sensitive). NOTE: If the exerciser does not have an email address, they will log in as a Guest (see page 19). 5. Before completing enrollment, review two documents, Terms and Conditions and Privacy Policy and agree to the terms presented. a. Tap on the Terms and Conditions link to review that document. Press Continue to return to the enroll screen. b. Tap on the Privacy Policy link to review that document. Press Continue to return to the enroll screen. c. Click in the box to indicate agreement to the terms presented in both d ...

Using the fingerprint log in feature is optional. If an exerciser declines to use this feature, they will be required to enter their email and password each time they log in. To enroll: 1. Tap Yes to proceed with the fingerprint enrollment. 2. Follow the screen prompts and, when directed, press finger on the sensor (located just under the display console). 3. Follow screen prompts to press finger on the scanner. Multiple prints will be collected. Part 3. Complete Account Setup 1. Sit with both feet on the pedals, then press Continue to measure weight. Fingerprint sensor ...

Logging In Once the exerciser has an account, they can log in either by entering their email address and password on the log-in screen or by placing their finger on the fingerprint scanner (if this was set up during the enrollment process). After logging in for the first time, the exerciser’s weight will be captured. The exerciser’s weight is used to calculate calories expended, elevation, Watts, and to set the default values for relevant testing and training programs. 1. Tap Continue to proceed. Log in screen ...

not saved for subsequent sessions. 1. Tap on the Guest tab. 2. Place both feet on the pedals. The system will calculate the exerciser’s weight. NOTE: If the guest user opts out of being weighed, the system will use the default weight of 150 pounds for all exercise parameters and default settings. 3. The Main Menu screen opens. Session Timed Out If the exerciser is off the TRANSITT longer than 5 seconds, the Session Timed Out window appears. The exerciser will be prompted to log off or continue. To continue, the exerciser with ...

session. ...