Red Sea MAX 250 Disassembling And Reassembling

• Place the hood upside down on a flat surface or if available on the original foam packaging. • Unscrew the 6 lens screws located at the front of the lens. • Rotate the lens to the upright position and remove from the brackets by pulling the lens towards the front. • Put the lens in a safe ...

1. Turn the hood over and place onto a flat smooth surface and collect all of the screws 2. Fold the front cover onto the top of the hood before separating the cover from the chassis 3. Place an object under the rear right end of the hood and press down firmly next to the timer 4. Insert a screw driver ...

AC Circuit DC Circuit Left Front Ballasts Transformer #1 Transformer #2 Right Inside the hood Timer Relays Ballast #2 Ballast #3 Ballast #3 Transformer #1 Transformer #2 ...

! MAX 250 Hood Replacing fans Fan Connectors • Locate the connector for the fan that needs replacing. • Note the direction that the fan is facing. Fans on the left side blow air into the hood, fans on the right suck air out of the hood. • Carefully cut th ...

MAX 250 Hood Disassembling and Reassembling the hood Warning: Ensure that the power cord is disconnected from the electrical supply. • Place the hood cover over the chassis. • Align the dove-tail connectors on the left and right sides at the rear of the hood and firmly push the parts together. • It may tak ...