AlfrescoPlus BBQ MODULE Assembly Instructions Manual

Text of the manual

For further instruction, please visit:

www.alfrescoplus.com.au 04014 12/19 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � BBQ�MODULE�(ALL

2 | ALFRESCOPLUS™

WARNING! – THIS IS A PERMANENT CONNECTION SYSTEM! WHAT’S NEEDED? Tools Required: • Soft Sided Hammer (Not Included) • Philips head screwdriver (Not Included) • Allen Keys x 2 (Included) • 50mm Diameter Hole saw or Jigsaw WHAT’S IN THE BOX? Box 1 of 3 = BBQ Airframe Box 2 of 3 = MODULE Panels & Frames Box 3 of 3 = MODULE

BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 3

� LAYOUT�DIAGRAM� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Essential�TIP:��Ensure�you�have�a�stable�flat�surface�or�workbench�to�work�from.�The�most�ideal�height�

4 | ALFRESCOPLUS™

ASSEMBLING SIDE & CENTRE WALLS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Assembling�Side�and�Centre�Walls��

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � FIG�8� � FIG�9� � FIG�7� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

6 | ALFRESCOPLUS™

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � No�Allocating�holes�are�used�for�plinth�feet�since�the�inside�frame�edge�provides�the�gu

BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 7

� � � Please�take�note�that�the�Kick�plate�provided�is�reversible,�thereby�giving�you�the�choice�between�a�black�“shadow�line”� finish�or�stylish�silver�finish.�The�Kick�plate�Biscuit�is�used�to�connect�onto�more�than�one�ca

8 | ALFRESCOPLUS™

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � FIG�15� � FIG. 15 Choose the desired color face of kick plate. (Silver or Black). No pre drilled holes are possible due to this color choice. S

BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 9

Illustration on attaching hinges to door panels by using the self-tapping screws provided. FIG. 17 Each door hinge includes a spacing bracket Place the spacing bracket on the underside of the door hinge before assembly Screw the door hinge to the door panel with the bracket in place as shown

Other Indoor Furnishing Manuals