Advantech AIMB-506 Operation & User’s Manual

Celeron LGA1151 MicroATX with VGA/DVI/DP/eDP (LVDS), 14 COM, Dual LAN, DDR4, PCIe x 16, PCIe x 1, PCI x 2 and SATAIII ...

ii Copyright The documentation and the software included with this product are copyrighted 2020 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, ...

A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of indus- trial environments. Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern. Here is a guide to Advantech’s customer services. To ensure you get the full benefit of our services, please follow the i ...

iv Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions:  This device may not cause harmful interference  This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B dig- ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment genera ...

Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to ...

vi Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped:  1 x AIMB-506 Intel LGA 1151 Core i7/i5/i3 /Pentium/Celeron Micro ATX Mother- board  2 x SATA HDD cable  1 x COM 1 to 2 cable  1 x COM 1 to 4 cable  1 x I/O port bracket  1 x Startup manual  1 x Warranty card If any of these items are missing or damaged, contact your distributor or sales repre- sentative immediately. We have carefully inspected the AIMB-506 mechanically and electrically before shipment. It should be free of marks and scratches and in perfect working order upon rec ...

Contents Chapter 1 General Information ............................1 1.1 Introduction ............................................................................................... 2 1.2 Features.................................................................................................... 2 1.3 Specifications............................................................................................ 2 1.3.1 System.......................................................................................... 2 1.3.2 Memory......................................................................................... 2 1.3.3 Input/Ou ...

viii 2.9 Front Panel Connectors (JFP1/JFP2)..................................................... 22 2.9.1 ATX Soft Power S.................................. witch (JFP1/PWR_SW)22 2.9.2 Reset (JFP1/RESET).................................................................. 22 2.9.3 HDD LED (JFP1/HDDLED) ........................................................ 22 2.9.4 External Speaker (JFP1/SPEAKER) .......................................... 22 2.9.5 Power LED and Keyboard Lock Connector (JFP2/PWR_LED & KEY LOCK)................................................................................. 23 Table 2.2: ATX Power Supply LED Status ( ...

7.3 Installation............................................................................................... 86 7.4 Windows® 10 Driver Setup (Realtek 8111G).......................................... 87 Appendix A Programming the Watchdog Timer..89 A.1 Programming the Watchdog Timer ......................................................... 90 A.1.1 Watchdog Timer Overview.......................................................... 90 A.1.2 Programming the Watchdog Timer............................................. 90 Table A.1: Watchdog Timer Registers....................................... 92 A.1.3 Example Program ............ ...

x B.47 USB2.0 Pin Header (USB1314)............................................................ 116 B.48 COM Port Pin Header (COM78910) ..................................................... 117 B.49 PCIe x16 Slot (PCIEX16_1).................................................................. 118 B.50 PCI Slot (PCI1) ..................................................................................... 119 B.51 PCI Slot (PCI2) ..................................................................................... 121 B.52 COM78910 Setting Pin Header (JSETCOM7)...................................... 122 B.53 LVDS/eDP Backlight Inverter Powe ...

2 1.1 Introduction AIMB-506 is designed with the Intel H310 for industrial applications that require both high-performance computing and enhanced power management capabilities. The motherboard supports 8th /9th Intel® Core™ i7/i5/i3 embedded processors up to 8 MB L3 cache and DDR4 2666 MHz up to 64GB, per slot up to 32GB. Multiple I/O connectivity of 14 serial ports, 12 USB 2.0, 8 USB 3.0, dual GbE LAN, and 3 SATA III ports are offered. 1.2 Features  Multiple I/O connectivity: Dual GbE LAN via PCIe x1 bus, 1 x PCIe x16 slot (Gen 3), 1 x PCIe x1 slot (Gen 2), 1 x PCI, 12 x USB 2.0 ports and 8 x USB 3.0 ports.  Standard Micr ...

Chapter 1 General Information 1.3.3 Input/Output  PCIe slot: 1 PCIe x16 expansion slot, 1 PCIe x 1 expansion slot, 2 PCI  Serial port: Fourteen serial ports, COM3 and COM7 are RS-232/422/485 with hardware auto-flow control and the rest are RS-232.  Keyboard and PS/2 mouse connector: Two 6-pin mini-DIN connectors are located on the mounting bracket for easy connection to PS/2 keyboard and mouse.  USB port: Supports up to 12 USB 2.0 ports with transmission rates up to 480 Mbps and 8 USB 3.0 ports with transmission rates up to 5 Gbps.  GPIO: AIMB-506 supports 16-bit GPIO from super I/O for general purpose con- trol ap ...

4 1.3.7 Mechanical and Environmental Specifications  Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)  Storage temperature: -40 ~ 85° C (-40 ~ 185° F)  Humidity: 5 ~ 95% non-condensing  Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb, 12V_4P  Power consumption: LAG1151 Core i7-9700E 2.6 GHz, 12MB L3 Cache, 2pcs 16GB DDR4 2666MHz memory +5 V 3.3 V 12V_4P 5 Vsb -12 V 12V 0.7A 0.78A 3.462A 0.53A 0 A 0.303A Measure the maximum current value with system under maximum load (CPU: Top speed, RAM & Graphic: Full loading)  Board size: 244 mm x 244 mm (9.6" x 9.6")  Board wei ...

Chapter 1 General Information Table 1.2: Connectors Label Function LANLED1 Front panel LAN indicator connector COM12 Serial port 1/2 (RS-232) COM3/4/5/6 Serial port: COM 3/4/5/6, box header 2 x 20 p Serial port COM3 support RS232/422/485 COM7/8/9/10 Serial port: COM 7/8/9/10, box header 2 x 20 p Serial port COM7 support RS232/422/485 COM11/12/13/14 Serial port: COM 11/12/13/14, box header 2 x 20 p KBMS1 On board external keyboard and mouse connector LAN1_USB12 LAN1 & USB12 connector LAN2_USB34 LAN2 & USB34 connector USB 5/6/7/8 USB port 5-8 USB 9/10/11/12 USB port 9-12 USB 13/14/15/16/17/18/ 19/20 USB port 13/14/15/16/17/18/19/20 ...

6 1.5 Board Layout: Jumper and Connector Locations Figure 1.1 Jumper and Connector Locations Figure 1.2 I/O Connectors ...

Chapter 1 General Information 1.6 AIMB-506 Board Diagram Figure 1.3 AIMB-506 Block Diagram 1.7 Safety Precautions Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the motherboard. Modern electronic devices are very sensitive to electro- static discharges. As a safety precaution, use a grounding wrist strap at all times. ...

8 1.8 Jumper Settings This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboards's default settings and your options for each jumper. 1.8.1 How to Set Jumpers You can configure your motherboard to match the needs of your application by set- ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” (or turn ON) a jumper, you connect the pins with the clip. To “open” (or turn OFF) a jumper, yo ...

Chapter 1 General Information 1.8.3 JLVDS1: LVDS Panel Voltage 3.3V/ 5V/ 12V selection *Default 1.8.4 PSON1: ATX, AT Mode Selector *Default 1 1 Table 1.4: JLVDS1: LVDS Panel 3.3 V/5 V/ 12 V Selector Closed Pins Result *JEDP1, 4-6 Jumper for +3.3 V EDP1, 2-4 Jumper for +5 V JEDP1, 3-4 Jumper for +12 V Jumper position for +3.3V (Default) Jumper position for +5V Jumper position for +12V Table 1.5: PSON1: ATX, AT Mode Selector Closed Pins Result 1-2 AT Mode 2-3* ATX Mode AT Mode 1-2 closed ATX Mode 2-3 closed ...

10 1.8.5 JWDT1+JOBS1: Watchdog Timer Output, OBS Alarm Option Table 1.6: JWDT1+JOBS1: Watchdog & Beep Pin Header Pin Pin Name 1 NC 2 Watchdog Reset# output 3 System Reset input# 4 SIO Warning Beep output 5 SP1 Buzzer Beep input Watchdog Timer Output (2-3) (Default) OBS BEEP (4-5) (Default) Watchdog Timer Disable (1-2) OSB BEEP (4-5) (Default) ...