Eleiko WPPO Manual
Text of Eleiko WPPO Manual
The equipment must be installed and used in a place whose access and supervision
are specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment.
ELEIKO recommends that all equipment is installed by a licensed contractor or an
ELEIKO-installer.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and
supervising personnel on proper usage o
This product is used for WPPO powerlifting Bench press, competition
and training.
Add sufficient
clearance, not less
than 0,6 m, on all
sides. Taking into
account the
accessibility to
remove and replace
bar and weights.
Product weight
278 kg
Dimensions (L x W x H)
4000x4000x30
PRODUCT SPECIFICATIONS
FOOTPRINT AREA
Textile carpet 4x4 m
Art no: 3002108-01
x8
Steel tube
x4
Ramp
Corner
x4
Bracket
x4
Plastic extension
Screw M8x12
Art no: 2000747-L12
Screw M6x12
Art no:2000863-L12
Wood Screw 4x45
x4
x16
x8
x4
Tape, double
sided
Art no: 3001973
x1
CONTENTS
The table below is general torque to use for different
threads. Use these torques, if nothing else is set. Below
numbers are for screw/nut of quality 8.8.
Allen key 5 mm
Allen key 4 mm
Screw driver, phillips
THREAD
TORQUE (Nm / ftlb)
Quality 8.8
M8
24 / 17,7
M6
9,8/72
REQUIRED TOOLS
GENERAL
wood screw 4x45
x8
Steel tube
Ramp
Plastic extension
Screw M6x12
Wood Screw 4x45
5.
x4
ASSEMBLY INSTRUCTIONS