Digitus DS-55101 Manual 

Full HD, 130 m Manual DS-55101 The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 130 m for the highest demands. It is used to transmit digital video and audio signals to a maximum distance of up to 130 m (via CAT 6). The highest supported video resolution is 1080p / 60Hz. CAT 5, CAT 5E and CAT 6 network cables are ...

Please read below safety instructions carefully before installation and operation: 1. Do not hot plug when it is working. 2. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster extension cable and IR receiver extension cable before installation. Feature 1. Plug and play, without installation. 2. Include a tr ...

...

(Computer graphics card, DVD, PS3, HD monitoring equipment etc.). 2. HDMI display device like SDTV, HDTV, and projector with HDMI port. 3. UTP/STP CAT5/5e/6 cable, follow standard IEEE-568B. Penal Description Transmitter unit (TX) 1) Reset button Restart the unit 2) RJ45 signal output Connect with network cable ...

1) Reset button Restart the unit 2) RJ45 signal input Connect with network cable 3) LINK indicator LED turns on all the time with HDMI signal transmission, flashes with no signal transmission 4) Power input Connect with DC5V1A power adapter 5) HDMI signal output Connect with display device 6) IR signal input Connect with IR receiver extens ...

unit (RX) via HDMI cables 2) Connect Transmitter unit (TX) and Receiver unit (RX) via network cables (CAT5, CAT5e or CAT6) 3) Plug the power supply to Transmitter and Receiver unit, each unit will power up then initialize itself, this HDMI extender w ...

A: 1) Check and make sure all cables are connected well; 2) Restart the TX/RX by “RESET” button. Q: RX “LINK” indicator is flashing all the time? A: 1) Make sure network cable connection follows the standard of IEEE568B; 2) Check whether transmitter has HDMI signal input; 3) Reset transmitter and receiver and reconnect. Q: ...