IDTECH ValueScan III IDBB-4244MRB Operation & User’s Manual

Revision History Changes to the user manual are listed below: Version Date Description Page # 1.0 2019/10/18 Initial release 1.2 2019/11/20 Updated the specifications of the scanner 56 1.3 2019/12/02 Style update 1.4 2019/12/20 Added Presentation Mode images 7 ...

Regulatory Compliance FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance wi ...

Note: All brands and trademarks are the property of their respective owners. The specifications contained herein are subject to change without notice. 警告使用者: 這是甲類的資訊產品，在居住的環境中使用時，可 能會造成射頻干擾，在這種情況下，使用者會被要 求採取某些適當的對策。 ...

Table of Contents 1. INTRODUCTION ...........................................................6 1.1. Application Field ................................................................ 7 1.2. Features ............................................................................... 7 2. UNPACKING .................................................................8 3. GETING STARTED .........................................................9 3.1. Installa ...

1. Introduction Your VALUESCAN III is a 1D CCD scanner that has been configured at the factory with default settings. Because many host systems have unique formats and protocol requirements, ID TECH provides a wide range of configurable features that may be selected using this bar code-based configuration tool. After configuration, the scanner stores the settings in nonvolatile memory. The embedded memory saves the settings when the power is turne ...

1.1. Application Field • Jewelry Tag • Manufacturing • Transportation & Logistics • Healthcare 1.2. Features • Makes daily work simple and easy • 2500 pixels CCD image sensor • Scan Speed≧270 times/sec • Maximum reading resolution: 3mil (0.762mm) • Depth of Field: 15~330mm (EAN, 13mil/0.33mm, PCS 90%) • Drop resistance: 1.5 meters onto concrete • Auto-sensing (presentation) mode available ※ Just scan the Presentation Mode ...

2. Unpacking Make sure the following items were included in your package: • Scanner x1 • Stand x1 • Quick Start Guide x1 • USB Cable x1 When you receive your scanner, open the package immediately and inspect for shipping damage. If you discover any damage, contact the shipping company and file a claim. ID TECH is not responsible for any damage incurred during shipping. Save all packing materials for the shipping company to inspect. Note: I ...

3. Geting Started This section provides information about installing, connecting, and using your scanner. 3.1. Installation Install your scanner with the steps below. 3.1.1. Setting Up Your Scanner 1. Plug the RJ45 connector into the scanner’s RJ45 port until it clicks. 2. Insert the USB connector to your computer. 3. Turn on your computer. It will autodetect your scanner. 4. To test your scanner, start a text editing program like Notepad or Mic ...

3.2. Scanning Barcodes VALUESCAN III emits a light bar when scanning. To scan a barcode, make sure the aiming beam crosses every bar and space of the barcode. This bar needs to cross the bar code horizontally to decode it. ...

4. Controls and Settings Customize your scanner to work efficiently. VALUESCAN III offers many features to match your preferences. The following section provides information about changing your scanner’s controls and settings. 4.1. Version Information Setting Codes Version (custom) 000A0 Display internal string (custom) 000A1 Display serial number (custom) 000A2 Factory default 000B0 Enable the code setting function 09990 Disable the code setti ...

4.2. Interface Mode Setting Codes VALUESCAN III supports USB HID and virtual COM. By default, your scanner is able to detect the interface automatically. When it detects USB, it selects HID as your scanner’s interface. USB-HID (Default) 000602 USB Virtual Com 000603 Note: If you use the scanner to communicate with your computer via a serial interface (e.g., COM1 ... COM8), but your computer does not have a serial port, the scanner requires a vi ...

4.3. Scan Mode Setting Codes Trigger mode (default) 013340 Continuous scan mode 013344 Presentation mode 013380 Key delay 013342 Single not triggered 013341 Key delay not triggered 013343 Auto flashing 013345 ...

4.4. Sound Setting Codes Sound on (default) 014201 Sound off 014200 Buzzer frequency 2048 0145800 High volume sound 014300 Low volume sound 014301 Buzzer frequency 2731 0145AAA ...

4.5. Character Delete, Insert, and Replacement Settings Code ID off (default) 01400 Code ID on 01401 Rear code ID on 01402 Display code front character (default) 0201x Hide code front blank 0200[SPACE] Display code rear character (default) 0203 Hide code rear character n (“n” indicates a blank key.) 0202[SP] Display characters inside code (default) 0205- Hide – inside code 0204- Disable A replace 0 in code (default) 020600 Enable A replace ...

Display rear characters (default) 023300 Hide rear 5 characters 023305 Hide rear 1 characters 023301 Display front characters (default) 023400 Hide front 5 characters 023405 Display middle characters (default) 023900 Hide 5 middle characters 023905 Forward start from 4th character 024004 FUNC1 replace with 1 0160049 FUNC2 replace with 2 0161050 FUNC3 replace with 3 0162051 ...

FUNC4 replace with 4 0163054 Disable enter replace (default) 0182013 Enter replace with 5 0182055 ...

4.6. Serial Port Settings Baud rate 600bps 000701 Baud rate 1200bps 000702 Baud rate 2400bps 000703 Baud rate 4800bps 000704 Baud rate 9600bps (default) 000705 Baud rate 19200bps 000706 Baud rate 38400bps 000707 Baud rate 57600bps 000708 Baud rate 115200bps 000709 Serial Port: No Check 001200 Serial port: XON/OFF 001201 ...

Serial port: RTS/CTS 001202 Serial port handshake timeout 2s 0013020 Serial port handshake timeout 5s 0013050 Serial port 8-bit data 00080 Serial port 7-bit data 00081 Serial port 1 stop bit 00090 Serial port 2 stop bits 00091 Serial port No parity check 001000 Serial port odd parity check 001001 Serial port even parity check 001002 ...

4.7. Normal Function Setting Codes Enable upload setting barcodes 02501 Disable upload setting barcodes (default) 02500 FUNC cast light upon cancel (default) 01640 Disable change 02510 All uppercase 02511 All lowercase 02512 Uppercase interchange with lowercase 02513 Enable command beep 01411 Disable command beep 01410 Forward image identify (default) 00161 Reverse image identify 00160 ...