L3 Systems KeyRF Manual
Text of the manual
Table of Contents
Introduction
1
Notes of Caution
1
Antenna Assembly
2
KeyRF Components
2
Connections using PS/2 Interface
3
Connections using USB Interface
4
LED Status
5
KeyRF Default Setup
5
Running Setup
6
[B] Button Configuration
7
[A] Transmitter Address
9
Changing Transmitter Battery
9
[D] Restore Setup to Factory Settings
10
[C]
The KeyRF PC Remote Control Adapter provides a way to send
remote control signals to your PC. Some of the advanced
features of the KeyRF are:
♦ Superior RF technology – Receives 360º with better
performance as compared to infrared type remotes.
♦ Easy to use – Remote fits easily in your palm, or your
pocket. No p
KeyRF – PC Remote Control
5/19/2007
2
L3 Systems
Antenna Assembly
KeyRF Components
The two key components of a KeyRF system are the
transmitter and receiver. The KeyRF is available with either a
two-button or a four-button transmitter. When a transmitter
button is pressed, it sends a radio frequency signal to the
KeyRF receiver. The receiver then relays da
KeyRF – PC Remote Control
L3 Systems
3
5/19/2007
Connections Using PS/2 Interface
1. First, make sure the Computer/Laptop is turned off.
2. For a desktop computer, first unplug the keyboard from the computer.
3. Plug the one end of the supplied KeyRF cable into the desktop computer’s
keyboard port, or a Laptop’s external mouse/keyboard port. If your mo
