Exmark STARIS E Series Operator's Manual
Text of the manual
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash
CONGRATULATIONS on the purchase of your
Exmark Mower. This product has been carefully
designed and manufactured to give you a maximum
amount of dependability and years of trouble-free
operation.
This manual contains operating, maintenance,
adjustment, and safety instructions for your Exmark
mower.
BEFORE OPERATING YOUR MOWER,
CAREFULLY READ THIS
Introduction ........................................................... 3
Safety ..................................................................... 5
Safety Alert Symbol......................................... 5
General Safety................................................. 5
Safety and Instructional Decals ....................... 6
Specificat
Safety Alert Symbol
This Safety Alert Symbol (Figure 2) is used both in
this manual and on the machine to identify important
safety messages which must be followed to avoid
accidents.
This symbol means: ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
g000502
Figure 2
Safety Alert Symbol
The safety alert symbol appears above information
which
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or access
Unlock to push machine.
2.
Rotate clockwise to lock.
4.
Read the instructions
before servicing or
performing maintenance.
decal116-8283
116-8283
1.
Warning—read the Operator's Manual for instructions
on torquing the blade bolt/nut to 55-60 ft-lb (75-81 N-m).
decal116-8559
116-8559
1.
W
Read the instructions before servicing or performing
maintenance
2.
Time interval
3.
Check oil level
4.
Refer to the Operator's manual for grease instructions
5.
Check hydraulic oil level and refer to the Operator's
manual or further instructions
6.
Check tire pressure
decal135-3004
135-3004
decal135-5210
135-5210
1.
Thrown o