3D Systems Cube Operation & User’s Manual

1 TABLE OF CONTENTS 1 INTRODUCTION 2 GETTING HELP 3 CONTACT 3 2 SETTING UP YOUR CUBIFY SOFTWARE 4 PRINT PROCEDURE 5 UPDATE APPLICATION 11 3 APP OVERVIEW 12 ACCOUNT SETTINGS 13 DESIGN FEED 14 MY SHELF 16 Item Selection 17 Delete a file 17 PRINT 18 Print Menu 20 Cube Info 22 Paint 23 View 24 ...

2 1 INTRODUCTION Thank you for purchasing the Cube® 3D Printer. The third generation Cube® 3D printer offers a new, compact design, dual color printing, a choice of 23 print colors in ABS and PLA plastics, touch-screen controls, printing direct from your mobile device and print speeds 2 times faster than other printers. Cube 3D Printer’s ...

3 GETTING HELP Select Help in the Account Settings menu to open this help document. Or check the Cube User Guide available at Cubify.com. CONTACT Mailing address: 333 Three D Systems Circle, Rock Hill, SC, 29730 E-Mail: [email protected] Web: www.Cubify.com ...

4 2 SETTING UP YOUR CUBIFY SOFTWARE For information on how to unpack and start using your Cube printer, see the User Guide available at Cubify.com. Topics in this chapter: • Print procedure • Applying glue to print pad • Updating the App ...

5 PRINT PROCEDURE Ensure that your printer and the device is on the same Wi-Fi network. For more details on connecting or printing with your Cube printer, see the User Guide available at Cubify.com Prepare file To print a .stl file from your PC or mac either download the Cubify application for desktop computers, or first upload your file to ...

6 4. Select Print. 5. Using the arrows, navigate to the file name of your creation. Press Print. If the print file requires another material is not installed, the printer will prompt you to change the cartridge(s). Select CHANGE CARTRIDGE and refer to the section titled Replacing A Material Cartridge in the User Guide. If there is not enou ...

7 If there is not enough material to complete the print but you want to use up the remaining material, press accept to continue. If the file was built with colors that are not installed, the printer will give you the option to change either the color of the creation or the cartridge. To replace the cartridge color to match the creation file, ...

8 The printer will load the print file.The estimated time to completion is noted at the bottom of the screen. The blue bar at the top is also a progress indicator that shows the status of the loading process. The print jets that will print the creation will begin heating up. ! CAUTION: Do not touch the print jets until they have cooled to ro ...

9 8. Once the printer has finished printing, press accept to continue. The printer jets will begin to cool down. ! CAUTION: Do not touch the print jets until they have cooled to room temperature. Removing your creation from the print pad ! CAUTION: Before attempting to remove your creation from the print pad, ensure that the Cube has finish ...