MSD Ignition 8961 Installation Instructions

Text of MSD Ignition 8961 Installation Instructions

PN 8961, Single-Pole, Double-Throw, 30 Amp/12 VDC

PN 8960, Double-Pole, Double-Throw, 30 Amp/12 VDC MSD Relays will allow you to activate a variety of accessories that require high current. These are ideal to tie in with an rpm activated switch to control a nitrous or air shifter solenoid. The benefit of a relay is that it can be energized using a small amount of power (12V/1 Amp). This moves the relay's armature so it can transfer a large amoun

MSD IGNITION • www.msdignition.com • (915) 857-5200 • FAX (915) 857-3344

Relays have a variety of specifications. A few things to consider include: • Make sure the Relay can accept and handle the voltage and current required to activate the desired circuit. • The number of bobbins to use with different circuits (generally 1-2). • The number of electrical contacts for the armature (generally 1-2). • If the Relay is
MSD IGNITION • www.msdignition.com • (915) 857-5200 • FAX (915) 857-3344 Figure 4 Connecting an Electric Fuel Pump. Figure 5 Connecting a Nitrous Solenoid at the Launch. Figure 6 Connecting a Two Step from a Clutch Switch with the PN 8960 Relay (manual Trans).

Figure 7 Connecting Multiple Nitrous Solenoids with PN 8960.

Limited Warranty   MSD IGNITION warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products purchased through auction websites. If found to be defective as mentioned above, it w

MSD Ignition Relays Owners Instructions: