Allseating INERTIA Disassembly Instructions
Text of Allseating INERTIA Disassembly Instructions
(Mesh or Upholstered)
Arm
(Plastic/Steel )
Seat
(Foam/Plywood)
Mechanism
(Steel )
Foot Rest
(Steel )
Cylinder
(Steel )
Base
(Plastic)
Caster
(Plastic)
For material recycling information please refer to the End of Life Recovery Matrix
and List of Recycling Facilities, which is available at www.alls
Date: June 7, 2012
Tools: #2 #3 Phillips Head, Rubber Mallet or Hammer, Allen Key, Box Cutter
Skill Set: Good manual dexterity.
Estimated Time: 16min per chair.
Steps:
1. Armrest - 2min
Turn the chair upside down, so the bottom is visible. Locate the four fasteners locate o
Date: June 7, 2012
8. Foot Rest - 1min
Remove footrest by placing one hand on cylinder and the other on footrest. Rotate the footrest
in a direction to loose. Read the instruction on footrest for direction.
9. Mechanism - 2min
Turn the chair upside down so the bottom is vi