AVS Electronics SANY SAFE L Manual 

Generality ......................................................................................................................................................... 23 Duration of the sanitization .................................................................................................................... 23 Wires connections .................. ...

IST1054V1.0 Generality SANY SAFE is able to vaporize the sanitizing liquid in environments from a few m3 up to 600 m3. The particles nebulized at high temperatures are invisible and disperse into the environment without leaving any residue. The invisible steam is able to attack any virus present and sanitize sheds, offices, shops, school buildings, h ...

IST1054V1.0 Technical features The products must be used according to the intended use and in compliance with the rules applicable to the various plant engineering types. However, before commissioning the installed products, the system must be tested in order to verify its functioning and compliance with the safety rules according to that indicated by ...

IST1054V1.0 Installation SANY SAFE can be installed on the wall. Its mounting is simplified thanks to a support bracket to which the central block of the sanitizer will be attached. For a lower aesthetic impact, SANY SAFE can also be installed inside built-in wardrobes, just be careful to ensure sufficient ventilation for the disposal of heat and to l ...

IST1054V1.0 Mounting SANY SAFE L Once the equipment is un- packed remove the two M6x10 screws and remove front cover Verify that package has been positioned in the correct direction before opening the package. For correct positioning of SANY SAFE L at wall, use the drilling plan supplied. Mark the holes according to preferred installation, keeping as ...

IST1054V1.0 Outdoor connections SANY SAFE L Insert an easily accessible 16 A C-curve multi-pole mains switch and having a minimum distance between the contacts of at least 3 mm in the electrical installation of the building. For electric network power supply input, use double insulation cables. Network connection SANY SAFE L (1) L - Phase 230V ~ (2) E ...

IST1054V1.0 Installation SANY SAFE XL Use the supplied drilling template for positioning the plate. Mark the holes based on the predefined type of installation. Use screw anchors that can withstand a weight of at least 75 Kg each. They must be suitable for the characteristics of the wall or ceiling to which they are secured. Installation must be execu ...

IST1054V1.0 Fix the equipment to the plate using the two supplied M5x10 screws Input for network power supply connection Outdoor connections SANY SAFE XL Insert an easily accessible 16 A C-curve multi-pole mains switch and having a minimum distance between the con- tacts of at least 3 mm in the electrical installation of the building. For electric net ...

IST1054V1.0 Board + DA DB - Not used. NO NC C FAULT Auxiliary output signalling FAULT: positive safety exchange relay free of voltage with a 2Acapacityat 12Vdc, that changes state in case of systemanomaly.Anomalies that activate this output are those included in the “Error signal” table. Indications for clamps are meant for equipment that is power ...