Beckhoff CX20 2 Series Manual 

CX20x2 3 Version: 1.7 Table of contents 1 Notes on the documentation .................................................................................................................... 5 1.1 Representation and structure of warnings......................................................................................... 6 1.2 Related documents............................................................................................... ...

CX20x2 4 Version: 1.7 7.2 Starting the Beckhoff Device Manager ............................................................................................ 41 7.3 TwinCAT.......................................................................................................................................... 42 7.3.1 Tree view ................................................................................................................ ...

CX20x2 5 Version: 1.7 1 Notes on the documentation This description is only intended for the use of trained specialists in control and automation engineering who are familiar with the applicable national standards. It is essential that the documentation and the following notes and explanations are followed when installing and commissioning the components. It is the duty of the technical personnel to use the documentation publishe ...

CX20x2 6 Version: 1.7 1.1 Representation and structure of warnings The following warnings are used in the documentation. Read and follow the warnings. Warnings relating to personal injury: DANGER Serious risk of injury Hazard with high risk of death or serious injury. WARNING Risk of injury Hazard with medium risk of death or serious injury. CAUTION Slight risk of injury There is a low-risk hazard that can result in minor inju ...

CX20x2 7 Version: 1.7 1.2 Related documents This documentation contains and describes material that is relevant for the CX20x2 Embedded PC. The CX20x2 Embedded PC is part of a modular system and belongs to the CX2000 Embedded PC series. Further information on the devices of the CX2000 Embedded PC series can be found in the associated documentation. Read and follow in particular the sections on safety in this documentation. The fo ...

CX20x2 8 Version: 1.7 2 For your safety Read the chapter on safety and follow the instructions in order to protect from personal injury and damage to equipment. Limitation of liability All the components are supplied in particular hardware and software configurations appropriate for the application. Unauthorized modifications and changes to the hardware or software configuration, which go beyond the documented options, are prohibited and nu ...

CX20x2 9 Version: 1.7 2.3 Safety instructions The following safety instructions must be followed during installation and working with networks and the software. Mounting • Never work on live equipment. Always switch off the power supply for the device before installation, troubleshooting or maintenance. Protect the device against unintentional switching on. • Observe the relevant accident prevention regulations for your machine (e.g. th ...

CX20x2 10 Version: 1.7 3 Transport and storage Transport NOTE Short circuit due to moisture Moisture can form during transport in cold weather or in the event of large temperature fluctuations. Avoid moisture formation (condensation) in the Embedded PC, and leave it to adjust to room temperature slowly. If condensation has occurred, wait at least 12 hours before switching on the Embedded PC. Despite the robust design of the unit, the ...

Embedded PC. The CX2000 product family consists of: • basic CPU modules, • CX2100 power supply units, • system, fieldbus and extension modules, • and the CX2900 battery pack. Fig. 1: Overview of the CX2000 product family with basic CPU module, power supply unit and modules. Basic CPU modul ...

retrofitted. Table 2: Available optional interfaces for the CX20x2. CX20x0-xxxx Optional interfaces CX20x0-N010 DVI-D, additional DVI-D socket for clone and extended display mode. CX20x0-N011 DisplayPort, additional DisplayPort for clone and extended display mode CX20x0-N030 RS232, D-sub connector, 9-pole. CX2 ...

1 2 3 6 4 5 7 8 9 10 Fig. 2: Example of a CX2072 Embedded PC. Table 3: Legend for the configuration of the basic CPU module No. Component Description 1 Multi-pole connection (left) Extension through system modules and fieldbus modules of type CX2500. 2 Optional interface [} 22] (X300) Space for interfaces such as RS232, EtherCAT, CANopen or others. The optional interface m ...

1 2 3 4 5 6 7 Fig. 3: CX20x2 name plate. Table 4: Legend for the name plate. No. Description 1 Information on the power supply unit. 24 V DC, 4 A max. 2 MAC addresses of the integrated Ethernet ports. By default, the host name is formed from CX plus the last 3 bytes of the MAC address: for example, the MAC address: ...

conjunction with the information on the name plate to ascertain the hardware, operating system and TwinCAT version of the basic CPU module. Fig. 4: Nomenclature for the basic CPU module. The basic CPU module CX2042, CX2062 and CX2072 is available with the following software options: Table 5: CX20x2, orde ...

Fig. 5: CX20x0 architecture overview. The CX20x2 Embedded PCs are based on the Broadwell microarchitecture developed by Intel. The following CPUs are used: • Intel® Xeon® D-1527, • Intel® Xeon® D-1548, • and Intel® Xeon® D-1567. In addition to the arithmetic unit, the CPU also house ...

• 2x SATA internal via the multi-pole connection (right). • 2x USB internal via the multi-pole connection (right). The interfaces (USB, DVI, and LAN) are standard interfaces. Devices that meet the corresponding standard can be connected to and operated at these interfaces. A VGA monitor can be connected to the DVI-I interface with an adapter. Intel® WGI210IT Gigabit Et ...

CX20x2 19 Version: 1.7 5 Description of the interfaces 5.1 USB 3.0 interfaces (X100, X101, X102, X103) Fig. 6: USB 3.0 interfaces X100, X101, X102, X103. The Embedded PC has four independent USB 3.0 interfaces for connecting keyboards, mice, touchscreens and other input or data storage devices. Fig. 7: USB 3.0 interface, pin numbering. Note the power consumption of the individual devices. Each interface is limited to 900 mA ...

CX20x2 20 Version: 1.7 5.2 Ethernet RJ45 (X000, X001) The two Ethernet interfaces are independent; no switch is integrated. The independent Ethernet interfaces can be configured in different ways. In delivery state the Ethernet interfaces (X000, X001) are configured for EtherCAT communication. Note that an additional switch is required for a line topology. X000 X001 LAN 1 LAN 2 LINK / ACT 2 SPEED 2 LINK / ACT 1 SPEED 1 Fig. 8 ...