BASKETBALL PROBASE probase01 Installation Manual
Text of the manual
- 2 -
IMPORTANT SAFETY NOTICE
• ADULT SUPERVISION IS REQUIRED DURING THE ASSEMBLING AND THE
INSTALLATION OF THE PROBASE.
• MISUSE OF A SLEDGEHAMMER CAN RESULT IN SERIOUS INJURY.
• ALWAYS WEAR SAFETY GOGGLES WHEN USING THE SLEDGEHAMMER.
• ENSURE THAT THERE IS ENOUGH ROOM AROUND YOU SO THAT YOU
CAN SWING THE HAMMER FREELY.
• MAKE SURE PEOPLE ARE AT L
- 3 -
INSTALLATION GUIDE
COMPONENTS
A Stake (2 identical components)
B Main pole holder
C Pivot
D Pivot base
E Removable front cover
F Pressure plate
G Tapping block (plastic or wood)
H Tapping block Holder
(plastic or wood)
I Handle bolts
J Bolts
K 15 or 17 mm nuts
L Flat washers Assemblies including
flange nuts (integrated washer nu
- 5 -
INSTALLATION GUIDE
TOOLS NEEDED
A Crowbar or steel rod
B Sledgehammer
C Level
D 15 or 17 mm open key wrench or ratchet tool
A
B
C
D
- 6 -
INSTALLATION GUIDE
1
CHOOSE YOUR SPOT
Choose a location that allows a
stake to be pushed in and that
is located directly behind a solid
surface such as pavement or a
concrete curb.
1.1 1.2
2
MAKE A PILOT HOLE
Make a pilot hole about 24 inches
deep using a pinch point crowbar
or a steel rod. Try to insert it in
- 7 -
INSTALLATION GUIDE
4
ASSEMBLE THE PIVOT BASE
TO THE STAKE
Assemble the pivot base (D) to the
upper part of the stake, aligning
the 4 holes of each part.
Insert 4 bolts (J), 4 flat washers*
(L) and 4 nuts (K) into the 4 holes,
and tighten the bolts firmly.
4.1
4.2
4.3
5
FASTEN THE BOLTS
Fasten 8 bolts (J), 8 flat washers*
(L) and 8 nuts (K), into the 8
- 8 -
INSTALLATION GUIDE
6
PREPARING THE TAPPING
BLOCK (plastic or wood)
Place the tapping block (G) inside
the pivot base (D).
Insert the tapping block holder (H)
into the grooves of the tapping
block and push them between the
bolts to the base of the tapping
block.
6.1 6.2 6.3
7
PUSH DOWN THE STAKE
Lower
- 9 -
INSTALLATION GUIDE
8
IMPORTANT NOTICE ABOUT
THE WOODEN OR PLASTIC
TAPPING BLOCK
The wooden or plastic tapping
block (G) has been designed to
resist to one single installation.
The tapping block (G) is NOT
GUARANTEED.
Uncontrollable factors such as
compacted or rocky grounds, clay
soils, the size of the sledgehammer
or the striking power may damage
the