Autel MaxiVideo MV301 Manual
Text of the manual
Table of Contents
1. Safety Instructions ............................................................... 1
1.1 Work Area Safety ........................................................ 1
1.2 Electrical Safety ........................................................... 1
1.3 Personal Safety ............................................................ 2
2.
1. Safety Instructions
IMPORTANT: To avoid electric shock, fire and/or personal
injury or damage, please read this user’s manual carefully and
follow the safety instructions.
1.1 Work Area Safety
Always perform automotive testing in a safe environment.
Keep your work area clean and well lit. Cluttered benches
and dark areas may cause accidents.
If operating the tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) to protect supply.
1.3 Personal Safety
Do not use the tool while tired or under the influence of
drugs, alcohol or medications. A moment of interruption can
result in serious personal injury.
Do not over-reach. Keep proper footing and balance at
2. Description, Specifications and Tool
Components
2.1 Description
This premier Autel MaxiVideoTM MV301 digital videoscope
features a detachable wireless 3.5" color TFT LCD monitor. The
wireless capability aids you in examining difficult-to-reach areas
from a remote location up to 32ft (10m). The ergonomic tool
features comfortable pistol grip design, auto f
320 x 240
Power supply
Rechargeable Li-ion battery in monitor &
4 x AA batteries in camera
Tested
battery life
4-5 hours of continuous use
Transmission
range
32ft (10m) unobstructed view
Bandwidth
18MHz
Transmission
Frequency
2468MHz
Camera Head
16mm(0.63")/
8.5mm(0.33")/5.5mm(0.22")
Lighting
Fully adjustable LED
Imager head
8.5mm (0.33")
2.3 Accessories Included
1)
Blow molded case
2)
AC adapter
3)
User’s Manual
4)
Imager head and cable (16mm /8.5mm/5.5mm)
5)
Magnet, hook and mirror
6)
4 x AA Batteries
7)
Video-out cable
2.4 Tool Components
The MaxiVideoTM MV301 comes with the following items. Here
8.5mm diameter imager head and its matching accessories --
magnet, hook and mirror are shown
Handheld Display Unit- The ergonomic tool with
comfortable pistol grip design.
2)
Cable Connector – Connects the handheld display unit to
the imager head and cable.
3)
Imager Head and Cable – Connects to the instrument
while in use to view images and videos.
4)
Power Indicator Light – Illuminates green once the tool is
turned on.
5)
Tool’s Signal
2.5 Buttons and Controls
Fig. 3
A. LCD Screen – Indicates test results. Backlit, 320x240
pixels display with LED lighting adjustment.
B. Power Button – Turns on/off the tool.
C. Reverse Button – Controls the direction of the
real-time image.
D. Monitor’s Signal Input- Connects to the tool’s
signal output to function properly.
E.
Monitor’s Power L