Avid Technology VENUE S6L Manual 

— 1/28/19 9329-65894-00 REV A This guide shows you how to attach the included rack ears to the following VENUE | S6L I/O units: Stage 64 Stage 32 Stage 16 Local 16 • On all units, the ears can be installed on the front or the back of the rack depending on the desired orientation. • Stage 64 instructions also show h ...

niture or other rack housing. The ears can be installed on the front or the back of the rack depending on the desired orientation. Components Mounting the Stage 64 utilizes the following components: � ...

The included rack ears can be installed on the front or the back of the Stage 64. The front of the rack is where all the I/O connectors are located, and the back of the rack is where the power switches and associated AC connectors are located. To attach the rack ears to Stage 64: 1 Locate the rack ears and the rack ear m ...

The Stage 64 can be installed in a standard 19-inch road case. When the Stage 64 is forward-mounted in a case, its audio connectors face the front of the case. When the Stage 64 is reverse-mounted, its fans, power switches and AC connectors face the front of the case. To mount the Stage 64 in a case: 1 Team lift the ...

niture or other rack housing. The ears can be installed on the front or the back of the rack depending on the desired orientation. The front of the rack is where all the I/O connectors are located, and ...

function as handles. Rubber edging protects the box when used freestanding. To ensure proper airflow, make sure the vents on either side of Stage 16 are always exposed. To configure the Stage 16 rack ...

the Stage 16, and replace the 16 screws (eight per side). Replacement screws are provided with the Stage 16 in case any screws are lost. Replacing the rack ear/handles screws ...

niture or other rack housing. The ears can be installed on the front or the back of the rack depending on the desired orientation. The front of the rack is where all the I/O connectors are located, and ...