Bender TMX-HA Manual 

Text of Bender TMX-HA Manual 

Melde- und Bedientableau

Bestimmungsgemäße Verwendung Das Melde- und Bedientableau TMX-HA dient zur Umschaltung von MEDICS®-Modulen in HA-Version von Automatikbetrieb auf Handbetrieb. Diese Funktion der MEDICS®-Module UMC...-...HA, bzw. USC...-...HA (HA = Hand/Automatik), ist nur in Verbindung mit einem Melde- und Bedientableau TMX-HA gewährleistet. D

TBP202013deen / 05.2008

TMX-HA Operating elements Fig. 1: Operating elements TMX-HA The TMX-HA alarm indicator and operator panels provide the fol- lowing operating elements: 1H1 LED indicator, green, lights during automatic mode (se- lector switch in position AUTO = automatic). 1H2 LED indicator, red, lights during manual mode (selector switch in positio

TBP202013deen / 05.2008

TMX-HA terrupted. 1S4 ON button to activate the control element of Line 2. After pressing this button, connection of Line 2 will be establis- hed, provided that the control element of Line 1 has been switched off before. 1S5 OFF button to activate the control element of Line 2. After pressing this button, the power supply of Line 2

TBP202013deen / 05.2008

TMX-HA 4. Insert the TMX-HA into the mounting hole of the control cabinet door. 5. Fasten the spacer bolts. 6. Connect the TMX-HA to the Medics® module considering the wiring diagram of the Medics® module. For details refer to the wiring diagram below. 7. Fasten the brown cover plate to the rear of the TMX-HA. Wiring diagram Also

TBP202013deen / 05.2008

TMX-HA Legende zum Anschlussplan 1S1 Hand-/Automatik- Umschaltung 1S2 Schaltorgan von Leitung 1 ein 1S3 Schaltorgan von Leitung 1 aus 1S4 Schaltorgan von Leitung 2 ein 1S5 Schaltorgan von Leitung 2 aus 1S6 Lampentest H Handbetrieb für PRC487 1H1 Automatik-Betrieb 1H2 Störung Handbetrieb 1H3 Leitung 1 durchgeschaltet (ein) 1H4 Leit

TBP202013deen / 05.2008

TMX-HA Dipl.-Ing. W. Bender GmbH & Co.KG Tel.: +49 (0)6401-807-0 E-Mail: [email protected] Londorfer Str. 65 • 35305 Grünberg Fax: +49 (0)6401-807-259 Web: http://www.bender-de.com Postfach 1161 • 35301 Grünberg Alle Rechte vorbehalten. Nachdruck und Vervielfältigung nur mit Genehmigung des Herausgebers. Änderungen vo

Bender Control Panel Owners Instructions: