Behringer 112 DUAL VCO Quick Start Manual

Text of the manual

Quick Start Guide

112 DUAL VCO Legendary Analog Dual VCO Module for Eurorack Controls (1) PW MOD IN – Accepts a voltage from another module to control the pulse width. (2) VCO OUT – Send the VCO signal to one or two sources via 3.5 mm TS cables. (3) WAVEFORM – Select pulse, triangle or sawtooth waveforms for the VCO. (4) PULSE WIDTH – Adjusts the pul

The necessary screws are included with the module for mounting

in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threa

Other Control Unit Manuals