Bauer Ecostar 6000 Update Manual

Seite 1 von 12 Contents Attention ................................................................................................................................................. 1 Software Update ..................................................................................................................................... 2 Possibility 1 ..................................................................................... ...

Seite 2 von 12 Software Update Bauer GmbH provides several updates for the Ecostar6000 to improve the functions of the system. The latest software versions are available on the Bauer – homepage. There are two possibilities to update the Ecostar. The following steps describes how to make a successful update. Possibility 1 Step1: Preparing the USB stick Download the actual version from the homepage e.g. “Ecostar 6000 VXX.XX.zip ...

Seite 3 von 12 Step2: Disconnect the power supply Remove the plug of the at the battery or unplug the connector at the backside of the Ecostar6000 Figure 2 - Power supply Step3: Plug in the USB stick Plug in the USB stick at the USB port at the backside of the Ecostar6000. Figure 3 - USB stick ...

Seite 4 von 12 Step 4: Plug in the power supply After connecting the power supply the Ecostar6000 checks if there is an USB stick connected. If the USB stick is recognized, a special update melody comes up and the controller starts to update the software. During the update the display is black but at the back there should flushing three led’s. Figure 4 - LED's flushing The update is ready when the homescreen is shown on the dis ...

Seite 5 von 12 Attention There is a second possibility to update the Ecostar if the update was not successful. Possibility 2 Step1: Preparing the USB stick Download the actual version from the homepage e.g. “Ecostar 6000 VXX.XX.zip”. Unpack this file and copy the four files on an empty USB stick: Bios.inf Ecostar.bin EEPROM.BAK SPIFLASH.BAK Figure 7 - Update Files ...

Seite 6 von 12 Step2: Plug in the USB stick Plug in the USB stick at the USB port at the backside of the Ecostar6000. Figure 8 - USB stick If the USB stick was recognized the USB symbol is shown at the right corner. Figure 9 - USB symbol Step3: Backup Menu Press “Menu” and open the “Backup“. Enter the Backup Menu with “8570” and open the second page by pressing “down arrow”. ...

Seite 7 von 12 Figure 10 – Backup page 2 Press „restart“, a special update melody comes up and the controller starts to update the software. During the update the display is black but at the back there should flushing three led’s. Figure 11 - LED's flushing The update is ready when the homescreen is shown on the display. Figure 12 - homescreen Step 5: Remove USB stick / power reset Remove the USB stick and plug off and on ...

Seite 8 von 12 Step6: Check the software version Check if the correct version is installed. This information is available at “Menu” -> “Service / Info” -> “Info”. Figure 13 - installed SW version2 Installing new languages If there is a big system update available for the Ecostar6000 it is also necessary to install or to update the language files. For this the newest versions are available to download at the Bauer home ...

Seite 9 von 12 Figure 15: Sytem setting Press button next „select language Figure 16 - change language The list of all imported language appears -> delete the selected language by pressing “delete” Figure 17 - delete language After pressing delete the Ecostar is making a reset, this can take several seconds. Step3: Plug in the USB stick Plug in the USB stick at the USB port at the backside of the Ecostar6000 ...

Seite 10 von 12 Figure 18 - USB stick Step4: Import the new language files . At “Menu” -> “base setting” -> press button where the actual selected language is shown e.g. “Deutsch” Figure 19 - Base setting Press button next “import language” Figure 20 - import language The language files at the USB stick is shown in a list ...

Seite 11 von 12 Figure 21 - list of files Select the language file and press “import”. The import can take several seconds because the Ecostar6000 makes an software reset. Step5: Select the language After the newest language version is installed it only has to change to this newest version. This can be done at the language menu by pressing the button next to “select language” -> the list of imported languages is shown Fi ...

Seite 12 von 12 List of figures Figure 1 - Update Files ............................................................................................................................................. 2 Figure 2 - Power supply ........................................................................................................................................... 3 Figure 3 - USB stick .............................................. ...