Blackstar Live Logic Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. 8. Install in accordance with the manufacturer’s instructions. 9. Do not install near ...

High loudspeaker levels can cause permanent hearing damage. You should therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear hearing protection if continuously exposed to high levels. If the product does not operate normally when the operating instruction ...

technical research and benchmarking against market leading products. Designed from the ground up for musicians and producers, they are feature filled and compact. The Live Logic USB MIDI footcontroller gives you quick and easy performance control of any MIDI hardwar ...

control software via USB to customise the MIDI messages being sent via MID cable and USB. Map any of the following message types to the six footswitches:  Program Change  Control Change  Note  Clock  Note 7 & 8. The Live Logic Footcontroller can be power ...

 Live Logic MIDI output  Series One MIDI input  Patch mode - changing channel on your Series One (Set patch mode display to offset)  Custom mode  Download the Series One Template from https://www.blackstaramps.com/uk/ranges/live-logic/usb-midi-controller to change patch with two switches left blank for other MIDI equip ...

software programs: Firmware Update To obtain the latest firmware for your Live Logic Midi Footcontroller, please visit the Blackstar Live Logic webpage https://www.blackstaramps.com/uk/ranges/live- logic/usb-midi-controller and download/ install the firmware updater to ...

Button Features & Functions 1. FOOTSWITCHES This displays the footswitch you are currently editing. Press any button on your live logic while in CUSTOM MODE to select which switch is currently being edited. 2. EXP 1 + EXP 2 Select to edit the Expression pedal settings 3. GLOBAL SEND VALUES After making an ...

 MIDI CHANNEL - Set the MIDI Channel on which the selected footswitch/ expression pedal sends the Program Change message.  CC MESSAGE NUMBER - Set the Control Change (CC) number that you wish to trigger when pressing the selected footswitch or expression pedal. Refer to the MIDI table in the user manual of the devic ...

• INTERNAL CLOCK will use the footswitch selected as a Tap tempo. - The LED above the footswitch will flash in time with the tempo set. - Tap the footswitch in time with your desired tempo to set the speed. - The tempo will be shown on the Live Logic display • EXTERNAL CLOCK - This will display any incoming clock m ...