BYOC Bass Overdrive Kit Instructions

Blue Overdrive Kit Instructions Warranty: BYOC, Inc. guarantees that your kit will be complete and that all parts and components will arrive as described, functioning and free of defect. Soldering, clipping, cutting, stripping, or using any of the components in any way voids this guarantee. BYOC, Inc. guarantees that the instructions ...

kit in a satisfactory manor. Nor does BYOC, Inc. promise or guarantee that you will receive any technical support. Purchasing a product from BYOC, Inc. does not entitle you to any amount of technical support. BYOC, Inc. does not promise or guarantee that any ...

Parts Checklist……………………….................…...page 5 Populating the Circuit Board…….................…...…page 7 Main PCB Assembly..................................................page 15 Wiring……………………………….........................page 21 Operation Overview................ ...

different color capacitors, switches etc. Don’t be alarmed by this. They all still do the exact same thing. ...

Resistors: Metal Film (5-bands) / Carbon Comp (4-bands) 1 - 1k (Brown/Black/Black/Brown/Brown) / (Brown/Black/Red/Gold) 1 - 1k2 (Brown/Red/Black/Brown/Brown) / (Brown/Red/Red/Gold) 1 - 1k5 (Brown/Green/Black/Brown/Brown) / (Brown/Green/Red/Gold) 6 - 2k2 (Red/Red/Black/Brown/Brown) / (Red/Red/Red/Gold) 3 - 4k7 (Yello ...

2 - 2N3906 or similar PNP transistor with similar pinout 5 - 2n5457 or similar FET with similar pinout IC: 1 - TL072 or similar dual opamp Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A PAIR OF NEEDLE NOSE PLIERS 1 - A100k (Volume) 1 - B10k (Tone) 1 - A250K Dual ( ...

If you will be using the Mod Pack, leave the following components off the PCB, and follow the link on page 14 for the Mod Pack component placement instructions. ...

Step 1: Add all the resistors. Resistors are not polarized and can be inserted in either direction. The spot highlighted in yellow is a jumper spot. Use a piece of wire or clipping. ...

stripe to the layout on the PCB. The striped end should go in the square solder pad. ...

This is a socket. The socket gets soldered to the PCB. The IC gets inserted into the socket. The actual IC will never get soldered. You will insert the ...