Bush WMNS714W Installation & User's Instructions

Installation & User Instructions – Please keep for future reference These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance. If you need help or have damaged or missing parts, call the Customer Helpline:0345 257 7271 52177927 - 13/10/15 WMNS714W-WMNS814W-WMNS814B WMNS ...

call the Customer Helpline: 0345 257 7271 Contents Safety Information 2 Parts 3 Installation 4 Unpacking your washing machine 4 Removing the packing bolts 4 Adjusting the feet 4 Water inlet hose connection 5 Drain hose connection 5 Electrical connection 6 Introduction of control panel 7 Detergent drawer 8 Programme selection 10 Electronic display 10 Auxiliary functions 12 Child Lock 14 Cancelling Programme 14 Fin ...

carried out by 2 people. • Dispose of all packing carefully and responsibly. • This appliance is for indoor use only. Only install in a dry indoor environment. • The appliance MUST be positioned on a firm level base. • Do not position the appliance where it is exposed to direct sunlight or heat sources as this will age the plastic and rubber components. • Warning: Ensure all 4 packing bolts have ...

call the Customer Helpline: 0345 257 7271 Front 1. Detergent drawer 2. Top panel 3. Programme Dial 4. Start/Pause button 5. Door 6. Filter Back 7.Packing bolt x 4 8.Power lead 9.Drain hose 10.Water inlet Parts 1 2 3 4 8 9 5 7 7 7 7 10 6 Water inlet hose x 1 Plastic plug x 4 ...

call the Customer Helpline: 0345 257 7271 Caution: 2 people are required to unpack the washing machine, it is recommended that gloves are worn. a: Carefully remove all packaging materials includ­ ing the foam base, dispose of correctly. Note: When opened, water droplets may be vis­ ible in the drum etc. this is normal as each appli­ ance is factory tested. Important: The packing bolts are designed to support t ...

call the Customer Helpline: 0345 257 7271 Important: This washing machine MUST only be connected to a cold water supply. a: Connect the water inlet hose, the angled connec­ tion attaches to the water inlet on the back of the washing machine. (7) b: The straight connection attaches to the water supply valve. (8) c: Ensure all seals are in place before connecting. Important: Only tighten the hose connection nut by ...

call the Customer Helpline: 0345 257 7271 Any electrical work that is required to install this washing machine MUST be carried out by a qualified electrician. Warning: THIS APPLIANCE MUST BE EARTHED Before making any electrical connections, ensure that: • Ensure the power socket is suitable for the maxi­ mum power of the washing machine (fuses in the power circuit must be 13 amp). • The supply voltage should ...

when you want to wash your laundry with liquid detergent. You can use your liquid detergents in all programs without prewashing. Place the liquid de­ tergent aparatus in the second compartment (which is available inside the machine) of the detergent drawer (*) and set the detergent amount. (Use the recommended amount of liquid detergent by deter­ gent producers). Do not exceed the MAX level, use only ...

Sections Main wash detergent compartment: In this compartment, only materials like detergent (liquid or powder), lime preventer and such can be used. You can find the liquid deter- gent aparatus inside your machine at first installa- tion. (*) Fabric conditioner, starch, detergent compartment: You can use softener for your laundry (recommended amount and type by the producer is recommended). Sometimes the fabric condition ...

With the programme dial, you can select the programme with which you desire to wash your clothes. You can select programmes by turning the programme dial in both directions. You must be careful that the adjustment sign of the programme dial is exactly on the programme you want to select. If you move the programme dial to 0 (off) position, while your machine is running, your programme will be cancelled. Note: If you want to ac ...

Water Temperature Adjustment Button Electronic Display Digital Display Wash level display Function display Auxiliary function symbol Start/Pause button Delayed start auxiliary function Auxiliary function button Rpm speed adjustment button ...

You can select the washing water temperature with the washing water temperature adjustment button. Whenever you select a new programme, the maximum washing water temperature is shown on the washing water temperature display. You can gradually decrease the washing water temperature between the maximum temperature and cold washing (--) by pressing washing water temperature adjustment button. If you have missed the washing water tempe ...

By using this auxiliary function, you can set the time when your machine start washing. This time can vary from an hour to 23 hours. To use auxiliary function of delay timer: - Press time delay button once. - Expression of “1 h” will appear on the display. - Symbol will flash on electronic display. - Press on time delay button until the time, on which you want washing operation to be started. - To activate the time delay you have select ...

programme buttons are pressed or programme button is turned when performing washing operation in your machine, child lock is available. Child lock will be activated in case pressed on both auxiliary functions 3 and 4 at the same time for more than 3 seconds. ‘’CL’’ symbol will flash on the electronic display when activated. If pressed any button while child lock is active, the “CL” symbol wi ...

Cotton 90° 90° 207 / 200 2 8,0 / 7.0 Very dirty, cotton and flax textiles. (Underwears, linen, tablecloth, towel (maximum 4,0 kg), bedclothes, etc. Pre-wash cotton 60° 165 / 165 1&2 8,0 / 7.0 Dirty cotton and flax textiles. (Underwears, linen, tablecloth, towel (maxi­ mum 4,0 k ...

call the Customer Helpline: 0345 257 7271 a: Plug in the machine. b: Open the water tap. c: There may be water left inside your machine after factory tests and trials. It is recommended that the first wash cycle be carried out with no laundry, to remove this water; pour half a measuring cup of normal laundry detergent into compartment 2 and select cotton program at 90°C. Laundry • Sort your clothes according t ...

call the Customer Helpline: 0345 257 7271 Your machine is equipped with systems which will take the necessary precautions and warn you in case of any. IMPORTANT: IT CAN TAKE UPTO 10 MINUTES FOR ERROR TO REGISTER. Failure code Probable failure Process to be followed The door is not shut properly. Shut the door properly so that you hear the click. If the problem per­ sists, turn off the machine unplug and contact ...

call the Customer Helpline: 0345 257 7271 Before cleaning your washing machine. a: Unplug your machine from the mains power supply. b: Close the water tap. Water inlet filters On the tap part of your machine’s water inlet hose and at the ends of water inlet valves, there are filters to prevent entrance of the dirt and foreign materials in the water to the machine. If the machine is unable to receive sufficient ...

call the Customer Helpline: 0345 257 7271 Care and Maintenance Detergent drawer Detergents may form sediments in your detergent drawer or in the housing of the detergent drawer over time. To clean the sediment, pull out the detergent drawer from time to time. To pull out the detergent drawer: • Pull the detergent drawer to the end. (1) • Keep on pulling by depressing on the section shown below in the detergen ...