Buffalo ADCHAIR1 Assembly Instructions
Text of Buffalo ADCHAIR1 Assembly Instructions
Attach Back (#A) and Seat (#B) using Bolt-M6x40mm (#AA).
2.
Attach Left Vertical Back Support (#E1) to Left Armrest (#C1) using Bolt-M6x35mm (#BB).
3.
Attach Left Front Leg (#D1) to Left Armrest (#C1) using Bolt-M6x35mm (#BB).
4.
Attach Left Vertical Back Support (#E1) to Seat (#B) using Bolt-M6x30mm (#CC).
5.
Attach Left Front Leg (#D1) to Seat (#B) using Bolt-M6x40mm (#AA).
6.
Attach Right Vertical Back Support (#E2) to Right Armrest (#C2) using Bolt
BUFFALO CORP 950 Hoff Road St Louis, MO 63366 Customer Service Phone 636-532-9888
ASSEMBLY INSTRUCTIONS
NOTE: Hand tighten all bolts in place, then
tighten with hex wrench when fully assembled.