Car-Interface.com r.LINK CI-RL3-UCON8-LV Manual
Text of the manual
Maserati vehicles with Uconnect VP4-NA
and 8.4 inch monitor
Video-inserter with 2 video inputs, rear-view camera input
and CAN control
Product features
Video-inserter for factory infotainment systems
2 CVBS video-inputs for after-market devices (e.g.
1. Prior to installation
1.1.
Delivery contents
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Connectors – video interface
1.4.
Settings of the 8 Dip switches (black)
1.4.1.
Enabling the interface’s video inputs (dip 2-3)
1.4.2.
Rear-view camera setting (dip 5)
1.5.
Settings
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. Apart from using this
product in an un
The interface inserts ONLY video signals into the infotainment.
For audio inserting, use the possibly existing factory audio-AUX-input
or a FM-modulator. If 2 AV-sources shall be connected to the
infotainment, for audio switching an additional electronic part is
requir
Connection - Video-Interface
The video-interface converts the connected after-market sources video signals into an RGB
digital signal which is inserted in the factory monitor using separate trigger options and it
reads vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for t
1.4.1. Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed when switching through the interface’s video
sources. It`s recommended to enable only the required inputs for the disabled will be
skipped when switching through the video-interfaces inputs.
1.4.2. Rea
Place of installation
2.1.1. Place of installation – video-interface
The video-interface has to be installed on the backside of the head-unit.
2.1.2. Place of installation - daugter PCB
The daughter PCB has to be installed inside the head unit.