CDA EVX90SS Use And Maintenance
Text of the manual
2 | Instruction Manual
Contents
3
Important information
5
Using your extractor
6
Care and maintenance
7
Installation instructions for standard fitting
15
Installation instructions for mounting the motor externally
15
Ducting
16
Recirculation
17
Mains electrical connection
18
Guarantee
19
Troubleshooting
20
Energy efficiency information
Instruction Manual | 3
Important information
The CDA Group Ltd cannot be held responsible for injuries
or losses caused by incorrect use or installation of this
product. Please note that CDA reserve the right to invalidate
the guarantee supplied with this product following incorrect
installation or misuse of the appliance or use in a commercial
environment
4 | Instruction Manual
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2012/19/EU.
At the end of its working life, the product must be taken to a
special local authority waste collection centre or to a dealer
providing appliance recycling services. Disposing of a household
appliance separately avoids possible negat
Instruction Manual | 5
Using your extractor
Power button
Pressing once will start the extractor at the lowest speed
setting, pressing again will turn the extractor off
Light button
Turn the lights of the extractor on or off
High speed button
Press to activate the highest speed setting, the display
will show the number 3. Holding this button down for 3
seco
6 | Instruction Manual
Care and Maintenance
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and leave marks on the
extractor. You can clean your extractor effectively by simply using
a dilute solution of water and mild detergent and drying to a shine
with a clean cloth.
Removing and cleaning the
Instruction Manual | 7
Installation instructions for standard fitting
Please note:
All installation measurements given are in millimeters
Fig. 2
582
882
Make a cutout in the ceiling with the measurements below
Fig. 3
Dimensions for installation reference
92
92
882
153.5
153.5
137.5
137.5
582
8 | Instruction Manual
Fig. 4
Fig. 5
Fix the upper bracket to the support structure
Fig. 6
Fasten the lower bracket to the upper bracket with the 8 screws supplied. We
recommend having an 85 - 100mm gap between the opening in the ceiling
and the lowest point of the lower bracket
Fix the duct outlet to the extractor with the 4 screws supplied