Cable Electronics AIO7 Instruction Manual

Garland, TX 75041 Phone: (469) 429-9200 Toll free: (800) 767-6189 Fax: (469) 429-9205 www.celabs.net WARRANTY Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time. No expressed or implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or modification. Video/photo playing on demand by pushing button, supports up to 7 flashing buttons Auto standby by motion sensor detection Supporting low power mode Auto detect to update the firmware and content Push buttons counter (Maximum 99999 times for each button) Brightness and contrast adjustment Automatic turn ON/OFF at certain time • • • • • • •

Item Specification Unit Contrast ratio 500:1 - Response time 15 msec Brightness 400 Cd/m2 Active area 150.48(W)x85.92(H) mm Viewing angle 70/70/50/70 degree Interface Digital - Back light LED - • Power: DC12V 2A • Working current: 500mA-700mA; Standby: 300 mA; Power Off: 5mA • Output: DC5V, 300 mA • Speaker: 2x1W • Languages: English/French/Spanish • Working Temp: 32°F-122°F, Humidity: 20-80% • Storage Temp: -15°-50°C • Motion sensor active area • Storage media to play: SD, USB drive and flash memory • Decoding file formats: *.jpg, *.mpeg1/2, *.dat, *.avi, *.mp4 • Image Decoding: • Super fast hardware decoding of JPEG picture • Decodes BMP, PNG, GIF, TIFF and other popular picture formats via DSP • Unlimited pixel resolution (currently tested with 100M pixel pictures) • Supports scaling (zoom in or out), rotation, and transition effects • Automatic image analysis and second generation dynamic image correction (DIC-III) • Video Decoding: • Multi-standard codec video decoding engine controlled by a dedicated video AMRISCTM processor • Motion JEG (MJPEG) engine supports up to full frame rate (30 fps) VGA quality movies • MPEG-4 ASP and XVID compliant • *.avi and *.mov file formats can be handled Key definition Additional Photos:

, move the cursor to LANGUAGE. Press ENTER to enter Language selection, using or to select, then ENTER to set the language Move the cursor to BRIGHTNESS. Press ENTER to select the level, press ENTER to confirm. Contrast Adjusted the same way as brightness. Date Set the same was as time. Time Format In 24h format by default, cannot be modified. Clock and Auto ON/OFF Time: Move the cursor to CLOCK, press ENTER to enter CLOCK SETTING. Press or to select TIME, press ENTER to confirm. Press or to select the digit. Use or to adjust clock, press ENTER to confirm. ↓ ↓ ↑ ↓ ↑ ↓ ↑ ↓ ↑ Automatic Update Using USB Drive Copy the firmware file named “upgrade.img” to the USB drive, then make a new TXT file named “upgrade.txt,” put it into the USB drive, it can be blank. The progress bar will display the procedure while updating. Turn off the power and then on after the update. Now, two restrictions for not updating: 1. While in the SETUP menu 2. Playing videos with buttons Manual Update: Copy the new firmware named “upgrade.img” to the USB drive or SD card, insert to the port of ad player, press the MENU and then SETUP to update. Turn off the power and then on after update. Note: a. DO NOT turn off the power or pull out the USB drive or SD card during the update, or the flash memory may be damaged b. DO NOT keep both “upgrade.txt” and “USB2SD.txt” in the USB drive, or it will cause malfunctions. Warning and Important Safeguards 1. If you are not a specialist, please don’t open the frame of the AD player for internal inspection, we will not take any responsibility for any incidences. 2. DO NOT cut of the power during the updating process to avoid firmware and dates missing. 3. DO NOT insert or pull out the SD card while it’s working. 4. DO NOT place heavy objects on the LCD screen, to avoid screen damage. 5. DO NOT expose the AD player to rain or moisture. 6. If the AD player doesn’t work for a long time, shut the power off.

to set the files source to play. Three sources can be selected in SD, flash memory and USB drive. Move the cursor to BUTTON COUNT, press ENTER to display the options: ON and OFF. Select ON to enable the button counting record, and OFF to disable it. After enabling this function, a text file named “Button_Count.txt” is generated in the SD card or USB drive. It will record the counting times of each button pressed. The maximum times is 99999. Volume The buttons or can be used to adjust the volume while the video is playing. Requirements of File Storage 1. The default video files in the root folder. 2. Folders named 1, 2, 3... used to store files corresponding to the push buttons. For example, if you want a video to be played after the button 1 is pressed, please place the video file in the folder named 1. 3. the folder named 5 is used to store the files when motion is active. Content Update Use USB drive to update content. Please keep in mind not to enter the setup menu, or it will not work. 1. Copy the files to the USB drive, refer to item 5, the requirement of file storage. 2. Make a TXT format file named “USB2SD.txt,” the content can be blank. Make sure the SD card is not write-protected. 3. Insert the USB to the USB port of ad player, then it will start to update the content. Automatic Power On Time Setting PHOTO SETUP In the menu of CLOCK SETTING, press or to select POWER ON TIME, then press ENTER to confirm. Press or to select ON, then enable this function. Press ENTER to confirm. Press or to select the hour and minute of Auto-Power-On, press or to set them, press ENTER to confirm. Press MENU to enter the main menu, press to move the cursor to the PHOTO, press ENTER to enter the PHOTO, press or to select DISPLAY MODE, press ENTER to list the selection. Press or to select the display mode: FIT TO SCREEN or FULL SCREEN, press ENTER to confirm Display Mode Slide Show Interval Adjusted the same way as Display Mode. Used to set the interval time between two photos. Sensor Time Transition Mode Used to control the transition performance between two photos. ADDITIONAL SETTINGS Press MENU to enter the main menu, press to move cursor to MORE SETTING. Press ENTER to list the time to set, then press or to select time to play after motion sensor active, select OFF to disable the motion sensor. ↓ ↑ ↓ ↓ ↑ ↓ ↑ ↓ ↑ ↓ ↓ ↑ ↓ ↑ ↓ ↑