BYOC A/B True Bypass Looper Instructions Manual

A/B True Bypass Looper Kit Instructions Warranty: BYOC, LLC guarantees that your kit will be complete and that all parts and components will arrive as described, functioning and free of defect. Soldering, clipping, cutting, stripping, or using any of the components in any way voids this guarantee. BYOC, LLC guarantees that the instr ...

shipping, but accountability of deliver as well. Please contact [email protected] to receieve a return authorization before mailing. Tech Support: BYOC, LLC makes no promises or guarantees that you will sucessfully complete your kit in a satisfactory mannor ...

INSTRUCTION INDEX Parts Checklist««««««««..............««.....page 4 Assembly.....................................................................page 5 - 9 Wiring.........................................................................page 10 - 18 Operating Overview...................................................page ...

Resistors: 3 - 4k7 (yellow/purple/black/brown/brown) Diodes: 3 - 5mm LEDs (Red, Yellow, and Clear Blue) Hardware: 1 - drilled enclosure w/ 4 screws 2 - 3PDT footswitch 3 - LED bezels 1 - AC adaptor jack 5 - ¼´mono jack 1 - ¼´stereo jack 1 - battery snap 4 - bumpers 1 - cable tie hook-up wire ...

pliers to hold the legs of the LED while pushing. You will feel it snap into place. Do not try to use your fingers. You will only bend the LED leads. ...

but trust us...you want them to be. Push the bezel into their respective holes through the top of the enclosure with your thumb. You will feel them snap into place. Orient the LED/Bezel assemblies so that the anodes are facing the jack side of the enclosure and th ...

Below is the numbering system used to differentiate the solder lugs on a 3PDT footswitch. ...

as seen in the pics. ...

of the bypass footswitch. Connect the cathode of the Red LED to LUG3 of the A/B footswitch and the cathode of the Yellow LED to LUG1 of the A/B footswitch ...