Cardas Audio Schuko Plug Assembly Instruction

2 Parts -Power Head -Internal Wire Clamp with screws -Body (Top and Bottom) -External Body Screws (2) -Internal Body Screws (2) -Ground Strap with retaining screw -Grommet ...

3 Assembly -Strip outer jacket of the desired cable 1-1/4” -Strip the individual conductors 3/8” -Slide Plug end Grommet over cable -Remove Ground retaining screw and Ground Strap from Power head -Install stripped conductors into the end of the power pins and tighten set screw using a 5/64” allen wrench -Fit Bottom section of the Plug ...

4 -Align grommet in the end of lower body -Fit top of body to the Power head -Insert internal Body Screws into the face of the Power Head and secure ...

5 -Insert Ground Strap into Power Head and secure with Ground Retaining screw -Insert External Body Screws and the Cardas Schuko Plug is complete. ...