Coaster 800117 Assembly Instructions Manual

Text of Coaster 800117 Assembly Instructions Manual

Fine Furniture for every stage of life

ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE PAGE 1 OF 11 800117 CONNECT-IT WRITING DESK REVISION 0 : 09/26/2017 REVISION 0 : 10/23/2019

PAGE 2 OF 11

ASSEMBLY INSTRUCTIONS ASSEMBLY TIME PARTS IDENTIFICATION 60 MINUTES ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & eas

PAGE 3 OF 11

NOTE: Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item. HARDWARE IDENTIFICATION Z NO DESCRIPTION FIGURE Q’TY 1 GLUE 40g 1 PC 2 WOODEN DOWEL Ø 8x30mm 30 PCS 3 CAM BOLT Ø 7x35.5mm 14 PCS 4 CAM LOCK Ø 15x12mm 14 PCS 5 SCREW Ø 4.5x42mm FOR BOTTOM

PAGE 4 OF 11

COASTERFURNITURE.COM INCORRECT CORRECT STEP 1 The Glue (1) should be used in the indicated locations to help solidify the assembled unit. 3 x 2 x 2 9 11 x 4 CL CR 7 x 2 2 x 26 x 12 8 7 (CL) (CR) 8 F B 7 (CR) A 7 (CL) 3 G 11 9 8 D 7 (CL) 2 7 (CR) C

PAGE 5 OF 11

COASTERFURNITURE.COM STEP 2 STEP 3 y of the structure. The Glue (1) should be used in the indicated locations to help solidify the assembled unit. 18 4 x 2 4 A F G B 1 4 18 5 x 10 5 E 1

PAGE 6 OF 11

COASTERFURNITURE.COM STEP 4 STEP 5 The Glue (1) should be used in the indicated locations to help solidify the assembled unit. 5 x 4 5 C D 1 3 x 8 H 3

Coaster Indoor Furnishing Owners Instructions: