CDVI STAR1M Installation Manual

Security to Access www.cdvigroup.com English EN STAR1M Mullion Mifare® Standalone Controller and Card Reader ...

1] PRODUCT PRESENTATION - 2-in-1 Mifare Reader : - Standalone Access control system - Wiegand Mifare® reader mode - Resin-coated electronics - Audible and visual feedback - 3 metre cable (10 wire cable - AWG28) - Up to 150 cards (shadow mode) - Up to 300 cards (standard mod ...

INSTALLATION MANUAL EN 4] OPERATION MODES Dipswitch Standalone mode (page 13) Wiegand mode (page 18) 1 OFF ON 2 OFF ON OFF ON Change the Master card NORMAL operation Dipswitch 3 option 44-bit 3 OFF ON OFF ON Shadow mode (page 15) Standard mode (page 16) 26-bit 30-bit 4 Not assi ...

6] SETTING READER MODE 1 ON 2 ON 3 ON ON ON ON 1 2 3 ON OFF ON OFF Before powering on, select the operating mode (Wiegand Mifare® reader or standalone mode). 1] Wiegand Mifare® reader (DIP1 ON) - green - red - blue + buzzer (starting sequence) 2] Standalone mode (DIP1 OFF) = f ...

INSTALLATION MANUAL EN Electromagnetic lock wiring example (Fail safe) 12V DC ADC335 Push button Magnet Strike fail safe Normal operation 1 ON 2 ON 3 ON 4 ON ON OFF Swipe user card Access granted Beep + green LED + relay activated Access denied Beep + red LED Blue LED Position D ...

INSTALLATION MANUAL EN Enter programming mode Yellow led Present user card Beep + green LED then yellow LED Blue LED Present the master badge Swipe the master badge or wait 10 seconds Exit programming mode To add more cards, repeat step user card and step shadow card. Present th ...

INSTALLATION MANUAL EN Add user cards (max. 300) Enter programming mode Yellow LED Present the user card one after the other Beep + green LED then yellow LED If the card is already programmed Beep + LED OFF then back to yellow LED Blue LED Present the master badge Swipe the mast ...

INSTALLATION MANUAL EN 7.3 Common operation Program or replace a Master badge 1 ON 2 ON 3 ON 4 ON ON OFF Set DIP2 to OFF Yellow LED + Beep Present the new master badge (the old one will be erased) Beep + LED OFF 1 ON 2 ON 3 ON 4 ON ON OFF Set DIP2 to ON Beep Blue LED After 10 se ...

INSTALLATION MANUAL EN 8.1 Wiegand 26, 30 and 44 bit output format 8] MIFARE® READER WIEGAND MODE OFF 1 ON 2 ON 3 ON 4 ON ON OFF 1 ON 2 ON 3 ON 4 ON ON OFF 1 ON 2 ON 3 ON 4 ON ON 30-bit Wiegand Output 44-bit Wiegand Output 26-bit Wiegand Output Important : - Switching « shado ...

INSTALLATION MANUAL EN 8.3 LEDs management in CENTAUR 8.2 LEDs management in ATRIUM GREEN ACCESS GRANTED RED ACCESS DENIED BLUE STANDBY LED STATUS GREEN ACCESS GRANTED RED ACCESS DENIED BLUE STANDBY LED STATUS GREEN LED CONFIGURATION RED LED CONFIGURATION GREEN LED ...